Try the Permatex Thread Sealant with bolts on alternators, air conditioning belts, distributor clamps, carburetor adjustment screws and, hairline cracks. It cures between engaged threads to form a unitized assembly that resists virtually all leakage, shock and vibration.
- Conforms to ASTM D5363 AN0261 (Mil-S-46163A, Type III, Grade R).
- Ideal For All Threaded Engagements Less Than Or Equal To 1/2 Inch In Diameter
- Prevents Rusting Of Threads. Seals Porosity. Cures Without Cracking Or Shrinking
- Low Viscosity Threadlocking Liquid
- Dissassembly : Requires Heat and Hand Tools
- Strength - Medium Strength
- 6 Milliliter Tube
- Color: Green
- No Supplier Warranty
- OEM specified
Note: Medium Strength Threadlocker works on metal parts. It is not recommended for plastics. Cured Medium Strength Threadlocker must be sheared (hand tools will do) before parts will separate. Note: Cannot be shipped by air.
Permatex (29000) Thread Sealant / Locker ; 6 Milliliter Tube (Green)
DIRECTIONS:
1. Clean and dry parts using Permatex® Surface Prep™ activator.
2. Shake tube of Medium Strength Threadlocker well before each use.
3. Remove cap and snip nozzle tip. 4. Apply Medium Strength Threadlocker to threaded areas and assemble parts. Refer to Technical Data Sheet for complete information.
|