Splendide 119126 Washer/Dryer Drive Belt (ARWXF129W, 2100XC/WD2100XC)

The Splendide 119126 is the OEM poly-V drum drive belt that transfers motor power to the drum on popular Splendide combo units. If your washer/dryer won’t tumble or spins inconsistently, a worn or stretched belt is a common cause—this genuine replacement restores proper rotation and performance.

Compatibility

• Splendide 2100XC, WD2100XC, 2100XCP
• Splendide ARWXF129W

Always confirm your exact model before ordering.

Specs

• Type: Poly-V (multi-rib) drum drive belt
• Belt strap width: ≈ 9/16" (about 14 mm)
• Loop length: ≈ 21-1/2"
• Construction: OEM grade for long service life

What’s in the box

• (1) Splendide 119126 drum drive belt

Installation notes

1. Unplug unit and turn off water. Remove access panel.
2. Slip the new belt over the drum and motor pulley; rotate drum by hand to seat evenly on ribs.
3. Re-install panel; run a short wash to verify smooth tumble and spin.

Basic tools required. If the belt comes off again, inspect the idler, motor pulley, and drum alignment.

Replaces / Cross-Refs

• Manufacturer part: 119126
• Also referenced in European listings as 6PJE1201 / C00119126 family (dimensionally similar poly-V belts). Use exact OEM where possible.