Stop fighting kinked sewer hoses and awkward angles at your tote tank. The Camco 39485 gives you a clean, downhill-flowing 90-degree connection between your standard RV sewer hose and your portable waste tote -- with a full 360-degree swivel so you can dial in the direction without repositioning the tank or the hose.
Connecting a straight sewer hose to a portable tote tank almost always produces a kink or a flat spot that slows drainage and traps waste. The Camco 39485 solves that with a dedicated 90-degree elbow designed specifically for the tote-tank connection point. The elbow redirects flow straight down into the tank, eliminating the bend that kills gravity drainage on flat or only slightly sloped dump sites.
Both ends use Camco's four-prong bayonet-style lug fitting -- the same standard found on the vast majority of RV sewer hoses and portable tote tanks sold in North America. The bayonet collar swivels a full 360 degrees, so once you lock the adapter onto the tank, you can rotate the hose entry to any angle without breaking the seal. Connection is secure and odor-tight when fully engaged.
The elbow body is molded from translucent, UV-stabilized resin. The translucent section lets you see flow and confirm the tank is fully empty before disconnecting -- no more surprise drips when you pull the hose. UV stabilization keeps the plastic from going brittle or cloudy after seasons of outdoor use.
Four-prong bayonet collar rotates freely so you can aim the hose inlet at any angle after locking onto the tank -- no repositioning required.
See-through body lets you confirm tank is empty and flow has stopped before disconnecting the hose, preventing messy spills.
Material resists UV degradation so the fitting stays flexible and clear through years of outdoor storage and use.
Manufactured domestically with a 90-day limited manufacturer warranty. Lightweight at 0.36 lbs -- easy to keep in your sewer kit bag.
The 90-degree angle does more than just eliminate kinking -- it ensures your sewer hose drops straight into the tote tank inlet rather than lying flat against it. Even on a level dump pad, a proper vertical entry at the tank lets gravity do the work and empties your black or gray tank faster and more completely.
The four-prong bayonet lug ends are compatible with the standard lug fittings used on Camco, Valterra, and most other RV sewer hoses and portable tote tanks. If your hose end and your tank both have the standard bayonet lugs (the most common configuration in North America), this adapter connects them directly with no additional fittings.
For a complete portable waste system, pair this adapter with a Camco Rhino Flex or Rhino TOTE sewer hose, a portable tote tank with a standard lug fitting, and a Camco 39631 Sewer Hose Support to maintain downhill slope from your coach to the tote tank.