Give your rig a clean, polished look with a direct-fit replacement awning fabric from Carefree of Colorado. The JU196D00 combines the valance and main canopy into a single seamless piece, restoring full shade coverage and curb appeal without a full awning replacement.
Worn, faded, or torn awning fabric doesn't just look bad -- it leaves your slide, entry, or patio exposed to UV damage and weather. The Carefree JU196D00 is a factory-spec replacement built to the same standards as original equipment, using heavy 13.5 oz vinyl with a White Weatherguard hood to protect the rolled fabric from sun, moisture, and abrasion when stowed.
This fabric is sized for 19 ft awning systems. The cut length is 18 ft 2 in, which is intentionally shorter than the awning arm span -- the fabric sits approximately 5 inches inboard of each arm end (10 inches total), which is the correct fitment for this style roller awning. Measure arm-center to arm-center before ordering to confirm the right size.
Valance and main canopy are a single uniform panel -- no seam line mid-fabric, cleaner look when extended.
Wraps the exposed outer edge of the rolled fabric to block UV, deflect rain, and resist road grime while traveling.
Heavier-weight vinyl resists tearing, holds color longer, and handles wind and rain better than lighter aftermarket alternatives.
Two polyrods seat into two separate slots in the roller tube for secure, rattle-free attachment at the roll bar.
This fabric is designed to work across a wide range of popular roller awning systems. Compatible brands and systems include:
The White Weatherguard is the reinforced outer wrap that covers the leading edge of the fabric when the awning is fully rolled up. On the road, awning fabric takes constant abuse from road vibration, UV exposure through the rolled layers, and moisture that can mildew or rot a lesser fabric. The Weatherguard shields that vulnerable outer wrap from direct sun and moisture, extending the service life of the fabric significantly -- especially for full-timers and seasonal travelers who log thousands of miles per year.
This is a DIY-friendly replacement for experienced RV owners comfortable working on awning systems. The package includes the fabric, a spline tool, and installation instructions. General installation steps for a roller awning fabric replacement:
Stand outside your RV with the awning fully extended. Measure from the center of the right arm to the center of the left arm. That measurement is your awning width. The replacement fabric will be cut approximately 10 inches shorter than that span -- 5 inches per side -- which is the correct fitment. For a 19 ft measured awning, the JU196D00 at 18 ft 2 in is the correct replacement.
Do not measure the roller tube itself -- tube length varies and will give you an inaccurate size reference.