Home > Covers > Travel Trailer Covers >

Classic Accessories Overdrive PermaPro Heavy Duty Travel Trailer Cover 38 ft to 40 ft -- Part 01-0826

Classic Accessories 01-0826 Overdrive PermaPro Heavy Duty RV Cover for 38 to 40 foot travel trailers with ripstop fabric and zippered access panels
Classic Accessories Overdrive PermaPro Heavy Duty Cover for 38' to 40' Travel Trailers
 
Alternative Views:


List Price: $849.89
: $576.49
You save $273.40!
Part Number: 8032722100
Manufacturer: Classic Accessories

Quantity in Stock :1

Free Shipping
Availability: In Stock
Qty:

 
Classic Accessories38 ft - 40 ft FitLimited Lifetime WarrantyOverdrive PermaPro Heavy Duty Travel Trailer Cover -- 38 ft to 40 ft (Part 01-0826)

The PermaPro cover is built for RV owners who want serious, long-term protection without fighting their cover every time they install or remove it. Extra-strength ripstop fabric, a no-crawl undercarriage strap system, and full-perimeter zippered access panels make this one of the most practical covers available for large travel trailers.

Purpose-Built Protection for Large Travel Trailers

Storing a 38 to 40 foot travel trailer for a season -- or even just a few weeks -- exposes your rig to UV degradation, moisture intrusion, wind abrasion, and debris accumulation. The Classic Accessories Overdrive PermaPro cover addresses each of those threats with materials and hardware designed specifically for long trailers that are awkward to cover and uncover.

At 30.8 lbs, this is a substantial cover, but the integrated toss-bag strap system and click-close buckles mean one person can install it without crawling under the trailer or climbing a ladder repeatedly. The zippered panels are positioned to reach RV entry doors, utility compartments, and access panels without removing the cover entirely.

PermaPro Ripstop Fabric

Extra-strength ripstop construction resists tearing under wind load while repelling water and blocking UV rays that fade paint, oxidize fiberglass, and degrade rubber seals.

Air Vent System

Integrated roof vents allow moisture to escape from inside the cover, preventing mildew and reducing wind-load ballooning that stresses seams and straps during storms.

No-Crawl Strap System

Weighted toss bags carry the undercarriage straps under the trailer from one side. Five click-close connection points per side lock everything down without requiring you to lie on the ground.

Zippered Access Panels

Full-length zipper pulls let you open compartment doors and entry doors without removing the cover. Long pulls mean most access points are reachable from ground level.

Fit and Adjustment

The cover is sized for travel trailers from 38 to 40 feet in length and up to 124 inches (approximately 10 ft 4 in) in height. Adjustable front and rear tension panels let you pull the cover snug along the length of the trailer, while elasticized hem corners conform to the contours of the front cap and rear bumper area. This combination reduces the billowing and flapping that can abrade exterior graphics and fiberglass over time.

Custom-Fit Features: Tension panels at front and rear, elasticized hem corners at all four lower corners, and the undercarriage strap system work together to keep the cover locked down in high-wind conditions without over-stressing the fabric at any single point.

Material and Weather Resistance

PermaPro fabric is a multi-layer ripstop material designed to balance water repellency with breathability. Hard waterproof coatings trap moisture between the cover and your RV exterior; PermaPro allows vapor to escape through the fabric and the roof vents while still shedding rain and dew. The result is a drier storage environment for your trailer's roof membrane, sidewalls, and slide toppers.

Quick-Drying Construction: The fabric sheds standing water quickly after rain, which matters during installation and removal. A soaking-wet 30-pound cover is far harder to fold and pack than one that dries in minutes.

Installation and Storage

Classic Accessories includes a zippered storage bag that expands to make re-packing the cover realistic in the field. The bag is large enough to accommodate the folded cover without forcing, which extends the life of the fabric and the bag zipper. For first-time installation on a long trailer, a two-person team is recommended -- one person on each side to manage the toss-bag straps simultaneously.

Maintenance Tip: Before covering the trailer for an extended period, clean the RV roof and sidewalls and allow everything to dry completely. Covering over wet or dirty surfaces -- even with a breathable cover -- can trap grime against paint and fiberglass and promote mildew in low-airflow areas like slide pockets.

What Is Included

  • 1x PermaPro travel trailer cover (38-40 ft)
  • 1x Expandable zippered storage bag
  • Integrated undercarriage strap system with weighted toss bags (straps are built into the cover hem)
Warranty: Classic Accessories backs this cover with a limited lifetime manufacturer warranty against defects in materials and workmanship.

Cover Specifications

Part Number01-0826
UPC052963025200
ManufacturerClassic Accessories
Product LineOverdrive PermaPro Heavy Duty
Cover Weight30.8 lbs

Fitment and Sizing

Trailer Length (Fit Range)38 ft to 40 ft
Maximum Trailer Height124 inches (approx. 10 ft 4 in)
RV TypeTravel Trailer (bumper pull)

Fabric and Construction

Fabric TypePermaPro ripstop multi-layer
Water ResistanceWater-repellent, not fully impermeable -- breathable construction
UV ProtectionYes -- blocks UV degradation of exterior surfaces
VentingIntegrated roof air vent system
Hem ConstructionElasticized corners, front and rear tension panels

Strap and Closure System

Undercarriage Strap Points5 connection points per side (10 total)
Buckle TypeClick-close straps
Toss Bag SystemYes -- weighted bags eliminate crawling under trailer
Access ZippersMultiple zippered panels with long pulls for ground-level reach

In the Box

Cover1x PermaPro heavy duty cover
Storage Bag1x Expandable zippered storage bag
StrapsIntegrated into cover hem -- no separate strap pack needed
Important Information
  • This cover is sized for travel trailers (bumper-pull) from 38 to 40 feet in length and up to 124 inches tall. Do not use on trailers outside this size range -- an oversized cover will not secure properly and can cause wind damage.
  • This cover is designed for travel trailers, NOT fifth-wheel trailers. Fifth-wheel units have a different front profile that requires a fifth-wheel-specific cover.
  • PermaPro fabric is water-repellent and breathable, not a fully waterproof tarp. It is engineered to shed rain while allowing moisture vapor to escape. Do not expect zero moisture penetration in extreme, sustained precipitation -- ensure your trailer is sealed properly before covering.
  • Clean and dry the trailer exterior before installation to prevent trapping abrasive debris against painted or gel-coat surfaces.
  • Inspect the cover periodically during extended storage, especially after severe weather, to confirm straps remain secure and vents are unobstructed.
  • First-time installation on a trailer of this length is easier with two people. One-person installation is possible using the toss-bag system but will take longer.
Manufacturer Part #: 80-327-221001-RT
Manufacturer Name: Classic Accessories
UPC: 052963025200
Weight: 30.8 lbs


Browse for more RV Accessories in the same category as this item:

Covers > Travel Trailer Covers
Covers