This is a replacement single jack pad for the RV SnapPad BF-10 pads. If you have not installed SnapPads yet please see the complete SnapPad BF-10 set here.

• Designed for Bigfoot 4-point leveling systems with 10" octagon-shaped feet.
• SnapPad Dimensions:
  • Inside Diameter: 10-3/8"
  • Top Overall Diameter: 11-7/8
  • Bottom Overall Diameter: 13-3/16"
  • Height: 2.75"
• This is to replace a damaged or lost snappad.
• Sold individually.
• Pad Weight: 5.8 lbs.
• Pad Color: Black.
• Limited 2-Year Manufacturer Warranty.
• Made in the USA.

Warning: Installing RV SnapPads on non-compatible leveling system will void the warranty.

SnapPad 10" Bigfoot 4-Point Leveling System Jack Pad - Single

How To Install:
1. Simply place the SnapPad underneath the metal foot of your RV. Note: SnapPads are easier to install with two people.
2. Lower the foot into the cavity and continue to apply pressure until the lip wraps over the edge of the foot. You'll know it's in place by the distinctive snap. We recommend using dish soap around the inner lip to help snap it into place.
Warning: Do not use petroleum-based lubricants (ex: silicone or WD 40), as this can erode the SnapPad.
3. Now your SnapPads are permanently installed and ready to effortlessly level your RV across any surface.
4. Should your SnapPad not install, raise your foot 3-4", place a shim on the side of the pad, and lower the foot. The shim will help snap the pad into place.
Caution: Be sure to keep your fingers away from pinch points while installing your SnapPad.