 |
 |
 |
|
The Reese Steadi-Flex Weight Distributing Kit With Sway Control is a great way to reduce sway and distribute weight, giving you a smoother ride when towing a trailer. It is made to distribute a portion of the trailers tongue weight onto the front axle of the tow vehicle and the trailer axles as well as provide superior resistance to sway. Without a system to distribute this weight, the tow vehicle/trailer set up may be unsafe as the rear axles of the tow vehicle can become overloaded, which makes a sway event more likely.
- Integrated sway control friction brackets increase frame clearance, and can be mounted between 27" and 32" back from the coupler
- No drill installation
- Hook-up brackets designed to provide increased frame clearance
- Innovative design eliminate the need for trunnion bar retention clips
- Fits 2" x 2" trailer hitch receivers designed to be used with weight distribution systems
- Will fit 6" frames with bottom mount couplers
- Color/Finish: Black Powder Coat
- Material: Steel
- Weight: 110.5 lbs
- Tongue Weight: 1,200 lbs.
- Gross Towing Weight: 12,000 lbs.
- Shank Adjustments: 8.75" rise and 4" drop with an overall height of 10"
- 13" Shank length with 8" length from back of shank to center hitch pin and 9.75" from front to center of hitch pin
- Hole Spacing: 1-1/4" apart on center shank
- Dimensions: 39.75" L x 11" W x 10" H
- Includes: Adjustable shank, hitch bar, hardware, chains, trunnion head assembly, 30" trunnion spring bars, sway control hook-up brackets, lift handle, pin and clip and installation instructions
- Limited lifetime manufacturer warranty
Note: Hitch ball sold separately. Requires 1-1/4" diameter shank.
Reese Steadi-Flex Weight Distributing Kit W/Sway Control
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
Important Note: First, remember that some trailer brake surge couplers aren't meant to work with hitches featuring add-on, bar style, friction sway control. If you do have surge brake couplers on your trailer, check with the manufacturer before installing the Steadi-Flex Weight Distributing Hitch or other hitches that feature sway control. If your towing vehicle is equipped with air shocks, springs, or an automatic load leveling system, remember to first check your vehicles' owner manual for instructions on installing a weight distribution kit. Finally, for the safest and best results possible, remember to have your trailer and vehicle fully, properly, and evenly loaded like you would as if you were heading out on the annual family camping trip. Tongue weight should always be between 10-15% gross trailer weight.
|
|
|
|
|
|
|
