Complete PTO-ready 6-roller cast iron pump kit with torque arm, chain, and multi-speed coupler included. 19.6 GPM, 150 PSI, counter-clockwise rotation, 5/8" shaft.
The Remco R660C-TAK takes the proven high-volume performance of the R660C and packages it with everything you need for a complete, ready-to-mount PTO installation. Included in the kit are the R660C cast iron roller pump, the RMTAC Torque Bar and Chain for rotation prevention, and the RMC585410 multi-speed coupler — giving you a fully outfitted sprayer pump setup right out of the box with no need to source accessories separately.
The R660C-TAK delivers up to 19.6 GPM through its 6-roller cast iron design, making it the right choice for large-acreage agricultural applications and high-demand PTO sprayer rigs. And like all RollMax pumps, it's built around Remco's Rebuild Ready design — fully serviceable in the field in minutes with only a wrench, without disturbing the drive shaft or plumbing connections.
Pump, torque arm, chain, and multi-speed coupler all included — no separate accessory purchases needed
High-volume 6-roller output for large-acreage coverage and demanding agricultural sprayer setups
Full field serviceability in minutes with only a wrench — shaft and plumbing stay connected throughout
Heavy-duty cast iron body engineered for the rigors of daily agricultural field use
• R660C — 6-Roller Cast Iron RollMax Pump, CCW Rotation, 5/8" Shaft, 3/4" FNPT Ports • RMTAC — Torque Bar and Chain for rotation prevention on PTO-mounted installations • RMC585410 — 5/8" Shaft, 540/1000 RPM Multi-Speed Coupler, Cast Aluminum/Zinc, Set Screws The R660RK Universal Repair Kit is sold separately and recommended to keep on hand for field rebuilds.
The R660C-TAK pump stays mounted to the drive shaft and plumbing throughout the entire rebuild process. All you need is a wrench: Step 1: Loosen and remove the 4 cap bolts Step 2: Slide the pump's endplate off the shaft carefully Step 3: Inspect and replace worn rollers using the R660RK repair kit; lubricate shaft seal before reinstalling Step 4: Reinstall the endplate and cap bolts Step 5: RollMax is ready to spray The R660RK Universal Repair Kit is sold separately — recommended to keep on hand for fast, no-downtime field rebuilds.
Repair Kit (sold separately): • R660RK — Universal Repair Kit: 6 Max Rollers (3/4"), Needle Bearing, 2 Lip Seals, O-Ring, Pill Key
📥 Download the RollMax Operation Manual (PDF) The manual covers installation, operation, maintenance, and rebuild procedures for the full RollMax pump series including the R660C-TAK. Technical Support: Remco Industries Website: remcoindustries.com
The R660C-TAK is configured for Counter-Clockwise (CCW) rotation only. Confirm your PTO drive shaft rotation direction before installation. Running the pump in the wrong direction will result in poor performance and accelerated wear. If your application requires clockwise rotation, see the R440C or R440SS models in the RollMax series.