Four permanent recycled rubber jack pads for compatible 6" round RV jack feet, adding grip, stability, surface protection, and approximately 1" of thickness per jack foot.
The SnapPad MN6SP4 Mini 6 4-pack is designed for RVs with four compatible 6" round jack feet. Once installed, the pads stay attached to the jack feet, eliminating the need to place loose pads under each jack during normal setup.
Made from durable recycled rubber, these compact SnapPads help increase the jack landing surface area, improve grip, reduce vibration, and protect both the jack feet and parking surface. They are commonly used on travel trailers and Class C motorhomes when equipped with compatible 6" round jack feet.
Designed for compatible 6" round jack feet
Snaps onto each jack foot and stays attached after installation
Adds approximately 88% more surface area to each jack foot
Includes four Mini 6 pads for four compatible jack feet
SnapPad MN6SP4 is selected by jack foot size and shape, not by RV brand alone. This 4-pack is intended for RVs with four compatible 6" round jack feet. Always measure each jack foot at its widest point before ordering. Compatible rig types commonly listed for this Mini 6 pad set include travel trailers and Class C motorhomes. Do not assume fit based only on RV make, model, year, or brand name.
Before Starting: Measure each jack foot before installation. This set is designed for four compatible 6" round jack feet only. Basic Installation Steps: 1. Measure All Jack Feet: Confirm each jack foot is round and measures 6" across at its widest point. 2. Check Clearance: Verify the installed pads will not interfere with tires, suspension parts, frame brackets, exhaust, or other nearby components when the jacks retract. 3. Inspect the Feet: Check for bent metal, heavy rust, damage, or unusual jack foot shape that may affect fit. 4. Clean the Feet: Remove dirt, gravel, grease, or loose debris from each jack foot. 5. Position Each Pad: Place a Mini 6 pad under each compatible jack foot and align it evenly. 6. Lower the Jacks: Use the jack or leveling system to press each foot into its pad until fully seated. 7. Confirm Attachment: Visually inspect that each pad has snapped securely around its jack foot. 8. Test Retraction: Retract the jacks and confirm the installed pads clear all nearby components.
Package Contents: • 4 SnapPad Mini 6 MN6SP4 permanent jack pads for compatible 6" round jack feet NOT Included — May Also Need: • Leveling jacks or jack feet • Separate leveling blocks or base pads • Wheel chocks • Replacement jack foot hardware • Additional or different SnapPads if the RV has mixed jack foot sizes This listing is for one 4-pack SnapPad Mini 6 jack pad set only. Verify each jack foot size and shape before ordering.
To confirm compatibility before ordering, have the following ready: • RV make, model, and year • Leveling or stabilizer system brand/model, if known • Photos of all jack feet from below • Measurements across each jack foot at its widest point • Confirmation that each jack foot is round • Clearance around each jack foot when fully retracted Why this matters: SnapPads are selected by jack foot shape and jack foot size. Even on commonly compatible RV brands, jack foot sizes can vary by model year, chassis, leveling system, stabilizer system, and previous repairs.
Match SnapPad MN6SP4 by 6" round jack foot size, quantity needed, and available clearance. RV brand or rig type alone is not enough to confirm fitment.
If a SnapPad does not seat correctly or clearance is tight, stop and recheck jack foot measurements, pad model, installation orientation, and nearby component clearance before operating the leveling system.