Two-foot SnapJack® QD adapter kit for compatible LCI® PSX1®, PSX2®, Quick Drop Stabilizer®, and Rock Solid Stabilizer Systems, replacing the original stabilizer feet with a permanent rubber SnapPad system.
The SnapPad QDU2 SnapJack QD conversion kit upgrades compatible quick-deploy stabilizer jacks with a custom metal replacement foot and permanent rubber SnapPad system. It is designed for select LCI® PSX1®, PSX2®, Quick Drop Stabilizer®, and Rock Solid Stabilizer Systems.
Instead of placing loose pads under the stabilizer feet each time you set up, SnapJack QD replaces the original metal foot with a wider 1/4" steel foot and attached recycled rubber SnapPad. The result is a more convenient stabilizer foot system with increased surface area, improved grip, and less setup hassle.
Replaces compatible quick-deploy stabilizer feet with SnapJack QD assemblies
Custom 1/4" steel foot with tuxedo black powder-coated finish
Uses an O Pad / Mini Square 5 recycled rubber SnapPad on each foot
Includes two SnapJack QD assemblies for two stabilizer jack feet
SnapPad QDU2 is not a universal SnapPad for all scissor jacks or stabilizer jacks. It is a conversion kit that replaces the current stabilizer feet on compatible LCI® PSX1®, PSX2®, Quick Drop Stabilizer®, and Rock Solid Stabilizer Systems. Confirm the jack system before ordering. If your RV uses a different scissor jack or stabilizer setup, another SnapPad or SnapJack model may be required.
Before Starting: Confirm the stabilizer system is compatible before removing the original stabilizer feet. This kit is intended for compatible LCI® PSX1®, PSX2®, Quick Drop Stabilizer®, and Rock Solid Stabilizer Systems. Basic Installation Steps: 1. Confirm Compatibility: Verify the RV uses a compatible quick-deploy stabilizer jack system. 2. Secure the RV: Park on a stable surface and follow safe stabilization procedures before working around the jacks. 3. Remove Original Feet: Remove the current stabilizer feet from the compatible jack assembly according to the manufacturer instructions. 4. Install Metal Foot: Attach the SnapJack QD metal foot using the supplied hardware. 5. Install SnapPad: Seat the included O Pad / Mini Square 5 SnapPad onto the metal foot as directed. 6. Repeat for Second Jack: Install the second assembly on the matching stabilizer jack. 7. Check Operation: Extend and retract the stabilizers slowly to confirm clearance and movement. 8. Verify Attachment: Confirm hardware is secure and each pad/foot assembly is properly seated before travel.
Package Contents: • 2 SnapJack QD custom metal stabilizer feet • 2 O Pad / Mini Square 5 recycled rubber SnapPads • Mounting hardware as supplied by manufacturer NOT Included — May Also Need: • Additional QDU2 kit or QD4 kit if upgrading four stabilizer feet • Stabilizer jacks • Replacement jack hardware beyond supplied kit hardware • Wheel chocks • Leveling blocks or support accessories for extreme ground conditions This listing is for one QDU2 2-pack SnapJack QD conversion kit only. Verify stabilizer system compatibility and the number of feet being upgraded before ordering.
To confirm compatibility before ordering, have the following ready: • RV make, model, and year • Stabilizer jack brand/model, if known • Confirmation of LCI® PSX1®, PSX2®, Quick Drop Stabilizer®, or Rock Solid Stabilizer System • Photos of the current stabilizer jack feet and mounting area • Number of stabilizer feet being upgraded • Clearance around the stabilizer feet when extended and retracted Why this matters: SnapJack QD is selected by stabilizer jack system, not just by the shape of the current foot. This conversion kit replaces the original feet on specific quick-deploy stabilizer systems.
Match SnapPad QDU2 by stabilizer jack system and foot mounting style. RV make/model or rig type alone is not enough to confirm fitment.
If the SnapJack QD kit does not install cleanly, stop and confirm the stabilizer system model, original foot mounting style, hardware placement, and clearance before operating the stabilizers.