Home > Home & Marine Upgrades > Wood & Pellet Stove Parts >

Thelin 00-0005-0027 T-1 Safety Sensor with Brass Fitting for Thelin Pellet Stoves

Thelin 00-0005-0027 T-1 replacement safety sensor with brass fitting for Thelin pellet stoves including Gnome, Parlour, Providence, and Tiburon models
Thelin T-1 Safety Sensor For Thelin Pellet Stoves
 
List Price: $70.00
: $38.49
You save $31.51!
Part Number: 00-0005-0027
Manufacturer: Thelin

Quantity in Stock :33

Availability: In Stock
Qty:

 
Thelin OEM Replacement Part Pellet Stove Safety Sensor Thelin 00-0005-0027 T-1 Safety Sensor with Brass Fitting

Keep your Thelin pellet stove operating safely with this direct-replacement T-1 safety sensor. The 00-0005-0027 features a brass fitting for durability and is compatible with the full lineup of Thelin pellet stove models. If your stove is shutting down unexpectedly or triggering fault codes, a failed safety sensor is a common cause -- this part restores normal operation quickly.

OEM-Style Safety Sensor Replacement for Thelin Pellet Stoves

The Thelin 00-0005-0027 is a genuine replacement T-1 safety sensor designed to fit any current Thelin pellet stove model. Also cataloged under NBK Parts number 20219K, this sensor monitors operating conditions inside the stove and cuts power or fuel feed when unsafe temperatures or conditions are detected -- protecting both the appliance and the surrounding space.

At just 2.5 inches in length and 0.05 lbs, this is a compact, lightweight component that installs without special tools. The brass fitting ensures a secure, corrosion-resistant connection within the stove's sensor circuit.

Brass Fitting Construction

Corrosion-resistant brass fitting provides a reliable, long-lasting connection inside the stove housing.

Universal Thelin Fitment

Fits all current Thelin pellet stove models including Echo, Comstock, Gnome, Parlour, Providence, and Tiburon.

Compact and Lightweight

At 2.5 inches long and 0.05 lbs, this sensor installs easily in the tight spaces typical of pellet stove interiors.

Dual Part Number Reference

Listed as both Thelin 00-0005-0027 and NBK Parts 20219K -- use either number to confirm you have the correct replacement.

What This Sensor Does

The T-1 safety sensor is a critical safety component in your Thelin pellet stove. It monitors internal stove conditions and signals the control board to shut down the appliance if conditions exceed safe parameters. Common symptoms of a failed T-1 sensor include:

  • Stove shutting down shortly after startup with no obvious cause
  • Fault or error codes displayed on the stove control panel
  • Stove failing to ignite or complete a startup cycle
  • Erratic operation or unexpected shutoffs during normal burn cycles

Replacing a faulty sensor restores the stove's ability to regulate itself correctly and resume normal, safe operation.

Direct OEM-Style Replacement: The 00-0005-0027 is the factory-specified T-1 sensor for all Thelin pellet stove models. No modification or adapter is required -- this is a plug-and-play replacement.

Compatible Thelin Stove Models

This sensor is confirmed compatible with the following Thelin pellet stove models:

  • Thelin Echo
  • Thelin Comstock
  • Thelin Gnome
  • Thelin Parlour
  • Thelin Providence
  • Thelin Tiburon

If you are unsure whether your specific stove model requires this part, cross-reference your stove's parts diagram using part number 00-0005-0027 or NBK Parts 20219K.

Part Number Cross-Reference: This part is sold under two catalog numbers -- Thelin OEM part 00-0005-0027 and NBK Parts number 20219K. Both refer to the same sensor assembly.
Maintenance Tip: If your Thelin stove is showing repeated shutdowns or fault codes, inspect the T-1 sensor and its wiring harness connection before replacing the control board. A faulty sensor is a far more common and less costly cause of these symptoms.
Installation Note: Always allow the stove to cool completely and disconnect it from power before removing or installing any sensor. Safety sensors are part of the stove's active protection system -- verify all connections are secure before resuming operation.

Part Identification

ManufacturerThelin
OEM Part Number00-0005-0027
NBK Parts Number20219K
Sensor TypeT-1 Safety Sensor
Fitting MaterialBrass

Physical Specifications

Length2.5 inches
Weight0.05 lbs

Compatibility

Thelin EchoCompatible
Thelin ComstockCompatible
Thelin GnomeCompatible
Thelin ParlourCompatible
Thelin ProvidenceCompatible
Thelin TiburonCompatible

What's in the Box

Included1x T-1 safety sensor with brass fitting (00-0005-0027)
Not IncludedWiring harness, control board, installation hardware
Important Information
  • Disconnect the stove from all power sources and allow it to cool completely before beginning any sensor replacement.
  • This sensor is a safety-critical component -- ensure all electrical connections are fully seated and secure before returning the stove to service.
  • This listing is for the sensor only. Wiring harness, connectors, and mounting hardware are not included.
  • Confirm your stove model against the compatibility list above before ordering. If unsure, cross-reference part number 00-0005-0027 or NBK Parts 20219K with your stove's parts diagram.
  • If fault codes or shutdowns continue after sensor replacement, inspect the control board and associated wiring for additional damage.


Browse for more RV Accessories in the same category as this item:

Home & Marine Upgrades > Wood & Pellet Stove Parts
Home & Marine Upgrades


$105.49
$663.56
$74.49
$2.99