Wood and pellet stove parts keep alternative heating systems operating safely and efficiently. Blower motors, ignition elements, gaskets, and control boards are common service items for pellet stoves. We carry parts for popular stove brands used in cabins, homes, and some mobile applications.
Maintaining a pellet stove and need to identify parts? Tell us your stove model and the issue you're experiencing.
Free shipping on most orders $99+ (US lower 48). Expert support and 90-day returns.
The Enviro 50-474 is a replacement stainless steel burn pot liner for certain Enviro and Vista Flame pellet stove models.
The Austroflamm Z12388 is a replacement low-limit switch gasket made for Austroflamm pellet stoves.
The Avalon 250-00527 is a replacement combustion exhaust fan blower motor for Lopi/Avalon pellet stoves. The combustion exhaust blower maintains the flame by forcing forced air through the stove.
The Breckwell A-E-033 is a replacement variable speed blower motor designed for pellet stoves. This blower motor relies on high-quality electronic components to run at variable speeds. Damper vibrations are reduced by high-temperature rubber bushings and washers.
Buck PESBR084 replacement blower motor for Buck wood & gas stoves. Quiet, efficient, correct fit. Motor only—reuse your blower wheel/housing.
The Napoleon W290-0113 is a convection blower gasket made to fit any Napoleon brand pellet stoves.
The Englander PU-AF11B is a bottom auger shaft designed to fit all Englander pellet stove models manufactured from 2001 on, including various 25-PDV and PDVC models.
The Englander PU-AF6T is a top auger shaft designed to fit any Englander pellet stoves, except for EP models.
The QuadraFire 812-3351 is a replacement EZ Clean Firepot made for 1200 and 1200i series QuadraFire pellet stoves.
The Harman 3-20-00844 thermister probe is designed to fit any Harman pellet stove manufactured after 2008. There are 2 different thermister probes for the Harman line. When ordering a new probe, you must order to match your existing probe color. 3-20-00844 probe wires are red.
The Harman 3-20-11744 thermister probe is designed to fit certain Harman pellet stoves. There are 2 different thermister probes for the Harman line. When ordering a new probe, you must order to match your existing probe color. 3-20-11744 probe wires are black.
The Englander PU-UCF204-12 is an auger bearing with grease fittings designed to fit various Englander brand pellet stoves.
The Englander PU-VS is a vacuum shut down switch made to fit certain Englander brand pellet stoves. Retrofits to older metal-type switches on pellet stoves manufactured before 2006.
The Englander CU-VS is a vacuum shut down switch made to fit certain Englander brand pellet stoves. Retrofits to switches on pellet stoves manufactured in 2006 and later.
The Englander PU-VH is a pellet stove vacuum pressure hose designed to fit vacuum shut down and firebox pressure switches. Works with all Englander brand pellet stoves.
The US Stove 80473 is a replacement exhaust blower for US Stove, King, and Golden Eagle pellet stove models. 2894 RPM, 115 volts, 60Hz cycles.
The Englander PU-CHA is a replacement cartridge igniter heater assembly made to fit Englander auto-start pellet stove models manufactured in 2004 or later.
The Englander PU-CH6 is a replacement cartridge igniter heater assembly made to fit Englander multi-fuel pellet stove models.
The QuadraFire SRV7000-531 is a vacuum pressure switch designed for certain QuadraFire pellet stove models. Detects air flow/restriction inside the firebox, the exhaust chamber, the vent pipe, and the fuel hopper on certain models.
The Drolet 44126 is a replacement auger motor made to fit Drolet Eco-35 or Eco-45 pellet stove models.
The Enviro EF-015 is a replacement ignition temp sensor designed for certain Enviro pellet stove models.
The Enviro EF-016 is a replacement high limit temperature sensor designed to fit most Enviro pellet stove models.
The Harman 3-20-677200 is an igniter compatible with all automatic ignition Harman pellet stove models.
The Englander AC-DGKC is a door gasket kit designed for Englander pellet stoves manufactured after July 1988 and wood insert model pellet stoves with JC or 20 in their model numbers, manufactured from 1986 to 1995.
The Lennox 8127 is a pellet stove igniter that will fit certain Lennox and Whitfield pellet stove models.
The Breckwell C-E-IGN is a cartridge heater igniter made to fit certain Breckwell pellet stove models.
The Glow Boy KS-5030-1061 is a replacement pellet stove ignitor for certain Glow Boy model pellet stoves.
The US Stove 80619 is a replacement ignitor for certain Golden Eagle, US Stove, and King model pellet stoves.
The St. Croix 80P52677-R is a replacement igniter compatible with St. Croix pellet stoves made in 2003 or earlier.
The Travis 99300148 is a replacement igniter for certain Avalon and Lopi pellet stove models.
The Whitfield 61050041 is an exhaust motor gasket made to fit certain Whitfield pellet stove models.
The Enviro EF-006 is a replacement convection blower gasket for certain Enviro and Hudson River pellet stove models.
The US Stove 88106 is a room blower gasket made to fit certain Golden Eagle, US Stove, and King model pellet stoves.
The Breckwell C-G-100 is a replacement convection blower rubber gasket made to fit certain Breckwell pellet stove models.
The Whitfield 12046300 is an auger motor designed to fit certain Blaze King, Earth Stove, Lennox, and Whitfield brand pellet stoves.
The St Croix 80P20278-R is an auger motor designed to fit certain St Croix brand pellet stoves. Your stove will be up and running in minutes with the auger motor mounted securely to the auger shaft.
The Englander PU-047040 is a replacement auger motor designed to fit Englander 25-PDV and 25-PDVC pellet stove models. Comes fully assembled, ready to install. Built-in leads connect directly to your pellet stove's wiring.
The Whitfield 12146109 is a replacement convection room air blower for certain Whitfield pellet stove models. Warm air is blown into your room from the stove with this blower.
The Avalon 250-00588 is a replacement convection blower motor for certain Lopi and Avalon pellet and gas stove models.
The Whitfield 12156009 is a replacement exhaust combustion blower motor kit made to fit certain Whitfield pellet stove models. No modifications necessary, comes fully assembled with hardware ready for installation.
The Whitfield 12150011 is a direct replacement blower motor/draft inducer for Whitfield brand pellet stoves.
The Whitfield 12056010 is a replacement exhaust combustion blower motor made to fit certain Blaze King and Whitfield pellet stove models.
The Enviro 50-1901 is a replacement combustion exhaust blower assembly designed for certain Enviro and Vista Flame pellet stove models.
The St. Croix Replacement Exhaust Blower Motor is compatible with most St. Croix pellet stove models.
The QuadraFire 812-3381 is a replacement combustion exhaust blower motor designed to fit QuadraFire Classic Bay 1200 and 1200i pellet stove models.
The QuadraFire 812-4400 is a replacement exhaust blower motor designed for certain PelPro pellet stove models.
The Kozi FAN12003 is a replacement exhaust blower motor designed for certain Kozi pellet stove models.
The QuadraFire 812-4900 is a convection blower motor made for a variety of QuadraFire pellet stove models.
The St. Croix Replacement Convection Blower Motor designed to fit certain St. Croix pellet stove models.
The Enviro EF-002 is a replacement convection blower motor made to fit certain Enviro pellet stove models.
The Harman 3-21-33647 is a replacement convection blower motor designed for certain Harman pellet stove models.
The US Stove 80472A is a distribution convection room blower made to fit certain Golden Eagle, US Stove and King pellet stove models. This blower motor allows your pellet stove to provide heat to the room by circulating air through its heat exchanger, which also prevents the stove from overheating.
The Breckwell A-S-BURNPOT is a replacement burnpot assembly made for certain Breckwell pellet stove models. Includes a stainless steel insert.
The Breckwell A-S-INSERT is a replacement stainless steel burnpot grate made to fit certain Breckwell pellet stove models.
The Napoleon NPAM is a replacement auger motor compatible with certain Napoleon NP pellet stove models.
The St Croix 80P30658-R is a vacuum pressure switch designed to fit certain St. Croix pellet stove models.
The QuadraFire 7034-247 is a firepot/burnout thermocouple with hardware included designed to fit QuadraFire Edge 60, Mt. Vernon AE Insert, and Mt. Vernon AE model pellet stoves.
The QuadraFire SRV7034-186 is a replacement thermocouple cover designed to fit QuadraFire and Heatilator Eco-Choice pellet stove models.
The St. Croix 80P20038-R is a proof of fire switch designed to fit certain St. Croix pellet stove models.
The Lennox H5891 is a resettable high-limit switch made to fit Lennox Bella, Winslow PI40, and Winslow PS40 pellet stove models.
The Lennox H5875 is a convection blower snap switch made to fit Lennox Bella, Winslow PI40, and Winslow PS40 pellet stove models.
The Enviro EF-017 is a replacement vacuum switch for certain Enviro and Hudson River pellet stove models.
The Harman 3-20-6866 is a differential pressure sensor vacuum switch made to fit certain Harman model pellet stoves.
The QuadraFire 812-1322 is a replacement thermocouple cover designed to fit various QuadraFire pellet stove models.
The Harman 3-21-00661 is a single-sided fan blade impeller made to fit certain Harman pellet stove models.
The Harman 3-20-502221 is a double paddle exhaust fan blade made to fit most freestanding Harman pellet stove models.
The Thelin 00-0035-0133 is a replacement igniter made to fit Parlour pellet stoves manufactured before 2006.
The Harman 3-00-08534 is a flame guide designed to fit certain Harman pellet stove models.
The Harman 3-00-06644 is a replacement flame guide made to fit Advance, Allure 50, and Absolute 63 model pellet stoves.
The Harman 3-00-03000 is a replacement flame guide made to fit a variety of Harman brand pellet stoves, including Accentra Insert, XXV, P35i Insert, and others.
The Thelin 00-0035-0125 is a replacement igniter made to fit Thelin pellet stove models including Parlour, Tiburon, Providence, Gnome, and Echo Comstock.
The Lennox H5889 is a vacuum pressure switch made to fit Lennox Bella, Winslow PI40 and Winslow PS40 pellet stove models.
The Breckwell A-COLLARBIGE is a replacement burnpot collar made to fit Breckwell Big E pellet stove models.
The Harman 3-50-00565 is a replacement auger shaft made to fit certain Harman pellet stove models.
The Harman 3-50-00465 is an old style auger shaft for certain Harman pellet stove models manufactured prior to 2009.
Our inventory includes parts for leading manufacturers such as Harman, Quadra-Fire, Englander, Enviro, US Stove, Whitfield, Breckwell, Napoleon, St. Croix, Avalon, Lopi, and many others. Each part is carefully selected for quality, durability, and exact fit to ensure reliable operation of your heating system.
Pellet Stove Components:
Auger Motors - Essential feed motors that work with control boards to intermittently turn the auger shaft, delivering pellets from the hopper to the burn pot. Available in various RPM ratings and shaft configurations to match your stove's specifications.
Combustion Blowers - Also called exhaust fans or draft motors, these pull air through the burn pot and heat exchange tubes while expelling exhaust gases through the flue. Critical for proper combustion and efficient burning with minimal ash production.
Convection Fans - Room air blowers that circulate heated air through heat exchange tubes and distribute warm air throughout your living space. Available in different CFM outputs for optimal heat distribution.
Burn Pots & Fire Pots - The basket or cupped area where pellets burn. These wear components require periodic replacement due to exposure to high temperatures and can show signs of cracking, pitting, or warping over time.
Control Boards - Electronic controls that regulate all stove functions including feed rates, ignition timing, blower speeds, and safety shutdowns. Modern boards often include diagnostic capabilities and programmable settings.
Wood Stove Parts:
Blower Motors - Specifically designed to withstand higher temperatures produced by wood-burning stoves and efficiently distribute heated air. Features ball bearings and metal components for quiet, long-lasting operation.
Door Gaskets & Rope Seals - Essential for creating airtight seals around doors and glass panels, ensuring proper airflow control and efficient combustion. Available in various rope diameters and materials.
Baffle Boards & Fire Bricks - Internal components that direct airflow and protect stove walls from direct flame contact. Fiber boards and vermiculite baffles help maintain proper combustion temperatures.
Glass Panels & Door Hardware - Replacement ceramic glass panels designed to withstand extreme temperatures, plus door handles, latches, and hinges for proper door operation.
Universal Components:
Gaskets & Seals - Door gaskets, glass gaskets, burn pot seals, and blower gaskets that maintain airtight operation. Critical for safety, efficiency, and proper combustion air control.
Ignitors & Heating Elements - Hot surface ignitors for automatic pellet stove lighting and heating elements for various stove functions. Built to withstand repeated heating cycles.
Thermostats & Sensors - Temperature controls, limit switches, and safety sensors that monitor stove operation and prevent overheating or unsafe conditions.
Maintenance Items - Stove cleaners, high-temperature paints, gasket cement, and specialized tools for routine maintenance and repairs.
Installation & Safety:
Many stove parts can be replaced by experienced DIYers with basic tools and mechanical knowledge. However, electrical components, gas connections, and safety devices should be installed by qualified technicians to ensure proper operation and maintain warranties.
Regular maintenance including cleaning", and component replacement extends stove life and ensures safe, efficient operation throughout the heating season. Quality replacement parts are essential for maintaining your stove's performance and safety certifications.