Slide-in 45-amp converter replacement kit for Parallax 7345/6345 and Magnetek 6345/7345 power centers. Patented Auto Detect technology automatically charges lithium-ion and lead-acid batteries. Upgrades old single-stage chargers to three-stage. Includes converter, DC fuse board, and fasteners. 780W output. 2-year warranty.
The WF-8945-AD-REP is designed to replace the removable converter section in the following power center models: Parallax: 7345, 6345 Magnetek: 6345, 7345 This kit slides into the existing power center housing — the existing enclosure stays in place and only the converter section is replaced. Confirm your power center model before ordering.
The WF-8945-AD-REP Ultra Converter Replacement Kit includes the exclusive, patented Auto Detect technology. This microprocessor-driven technology will recognize lithium-ion and lead-acid battery chemistries and automatically adjust the charging profile to match the battery type.
No more buttons. No more switches. An accurately charged battery gives RV owners peace of mind. Eliminating the risk of over- and under-charging, the WF-8945-AD-REP will maximize your battery life with multi-stage charging and current monitoring in both lead-acid and lithium-ion profiles.
The WF-8945-AD-REP has optimized charging for battery chemistry built in:
The WFCO WF-8945-AD-REP is designed for owners of Parallax 7345/6345 and Magnetek 6345/7345 power centers who want to upgrade from an aging single-stage charger to WFCO's three-stage Auto Detect converter without replacing the entire power center. The converter section slides out of the existing enclosure and the WF-8945-AD-REP slides in — the housing, wiring, and breaker panel stay in place.
The upgrade delivers Auto Detect technology for automatic lithium-ion and lead-acid battery charging, three-stage charging for lead-acid batteries, quiet filtered power, and the full WFCO protection suite — all at 45 amps and 780 watts. The kit includes the converter unit, a DC fuse board, and all required fasteners.
Patented microprocessor automatically detects battery chemistry and adjusts charging profile — no buttons or switches
Removes the existing converter section and slides in — existing housing, wiring, and breakers stay in place, no rewiring
Replaces an old single-stage charger with a high-performance three-stage converter charger
Overload and short circuit protection, plus over-current, over-temperature, over-voltage, and reverse polarity protection
• (1) WF-8945-AD-REP converter unit • (1) DC fuse board • Required fasteners • Installation instructions
Bulk Mode: 14.4VDC — rapid recharging when battery is depleted Absorption Mode: 13.6VDC — controlled charging as battery approaches full capacity Float Mode: 13.2VDC — maintenance charging to keep battery topped off without overcharging
Verify compatibility first: Confirm your power center is a Parallax 7345/6345 or Magnetek 6345/7345 before ordering. Slide-in installation: The existing converter section is removed from the power center enclosure and the WF-8945-AD-REP slides in — the enclosure, wiring, and breaker panel remain in place. Kit dimensions (converter in bracket): 12" W × 4.75" H × 7.65" D Consult a qualified RV technician if you are unfamiliar with RV electrical systems before attempting installation.