Home > RV Lighting > LED Light Bulbs >

Valterra DG726096VP 921 LED Replacement Bulb Bright White - 6 Pack

Valterra DG726096VP 921 LED Replacement Bulb Bright White - 6 Pack
Valterra 921 LED Replacement Bulb Bright White - 6 Pack
 
List Price: $47.42
: $32.49
You save $14.93!
Part Number: DG726096VP
Manufacturer: Valterra

Quantity in Stock :39

Availability: In Stock
Qty:

 
Valterra921 Wedge Base LED6-Pack ValueValterra 921 LED Bright White Replacement Bulbs -- 6-Pack

Stop replacing burned-out incandescent 921 bulbs one at a time. Valterra's DG726096VP gives you six bright white LED drop-in replacements in a single pack -- enough to upgrade every vanity, ceiling dome, slideout, and reading light in your rig at once. Same wedge base footprint as the original 921/T10, no adapter or rewiring needed.

Direct-Fit 921 LED Upgrade for Your Entire RV

The 921 (also cross-referenced as the T10 wedge base) is one of the most common bulb types found throughout RV interiors. You will find it in overhead dome lights, vanity strips, reading lamps, slideout courtesy lights, step lights, and awning accent fixtures from virtually every major RV manufacturer including Forest River, Keystone, Grand Design, Thor, Coachmen, Fleetwood, and Winnebago. Valterra's DG726096VP replaces all of these with a bright white LED that runs cooler, draws less current, and lasts far longer than the original incandescent.

With six bulbs in the package, most owners can do a full-coach swap in one session. That matters especially for boondockers and full-timers where every amp-hour counts -- swapping 10 incandescent 921s for LEDs can recover noticeable battery capacity over an evening of use.

Direct Plug-In Fit

Standard T10 wedge base -- twist out the old incandescent, press in the LED. No wiring changes, no adapters required.

Bright White Output

Cool white color temperature delivers crisp, clean light well-suited for reading, task lighting, and vanity areas.

Lower Current Draw

LED technology draws significantly less power than the original 21-watt incandescent equivalent, extending battery runtime when dry camping.

Six Bulbs Per Pack

Value pack covers multiple fixtures in a single purchase -- ideal for full-coach upgrades or keeping spares on board for travel.

Where You Will Find 921 Bulbs in Your RV

The 921 wedge base is used in a wide range of interior and exterior low-voltage lighting positions. Common locations include:

  • Overhead dome and ceiling puck lights
  • Bathroom vanity strips and mirror surround fixtures
  • Bedroom and bunk reading lights
  • Slideout interior courtesy lights
  • Entry step lighting
  • Awning-side accent and porch lights (check fixture voltage compatibility)
  • Cargo bay and exterior utility compartment lights
Full-Coach Upgrade Tip: Walk through your rig with the old bulbs and count your 921 positions before ordering. Many owners find 8-12 of this bulb type throughout the coach, making a two-pack purchase (12 bulbs) a smart move for a complete swap with spares.

Why Switch from Incandescent to LED

Factory-installed 921 incandescent bulbs typically draw around 18-21 watts each. A modest RV with 8 of these bulbs running simultaneously pulls 144-168 watts -- roughly 12-14 amps at 12V. LED replacements in the same fixture typically draw 1-3 watts per bulb, cutting that load by 85 percent or more. Over a 6-hour evening in camp, that difference can amount to 50-70 amp-hours returned to your battery bank.

Heat is another factor. Incandescent 921 bulbs run hot enough to be uncomfortable to the touch and can stress plastic lens covers over time. LED replacements stay nearly cool to the touch, which is safer for fixtures with enclosed lenses and reduces wear on lens retainer clips.

Compatibility Note: These bulbs are designed for standard 12V DC RV lighting circuits, which is the system voltage used in virtually all North American RVs and travel trailers. Verify your fixture is 12V before installation. Do not install in 120V AC fixtures.

About Valterra's DG-Series LED Lighting Line

Valterra's DG (Dura-Line / LED accessories) series covers the most common RV replacement bulb types -- 1141, 1156, 921, 1003, and festoon sizes -- as both single and multi-pack SKUs. The DG726096VP sits in the 921 family as the 6-pack bright white option, making it the best-value choice when you need to outfit multiple fixtures. Valterra products are stocked through NTP/Stag distribution and are found at RV dealerships and service centers nationwide, which means parts availability is consistent for warranty or replacement purposes.

Maintenance Tip: While replacing bulbs, check lens retainer clips and gaskets on exterior fixtures. Years of heat from incandescent bulbs can make plastic brittle. Replacing a cracked lens cover at the same time as your bulbs prevents water intrusion into the fixture housing.

Bulb Specifications

ManufacturerValterra LLC
Part NumberDG726096VP
UPC785175726947
Bulb TypeLED
Base TypeT10 Wedge (921 standard)
OEM Bulb Cross-Reference921, 922, 920, 912 (wedge base family)
System Voltage12V DC
Color TemperatureBright White (cool white output)
Quantity per Package6 bulbs

Package Dimensions

Package Length8.0 inches
Package Width8.0 inches
Package Height1.0 inch
Shipping Weight0.45 lbs

Compatibility

RV TypesClass A, Class B, Class C motorhomes, fifth wheels, travel trailers, toy haulers, pop-ups
Circuit Type12V DC only
Replaces OEM Bulb921 incandescent in any standard T10 wedge base fixture
Compatible BrandsForest River, Keystone, Thor, Coachmen, Fleetwood, Grand Design, Winnebago, Heartland, Jayco, and most other RV brands using standard 921 wedge base sockets

Installation Notes

Installation TypeDirect plug-in, no wiring required
Tools RequiredNone -- twist or pull out old bulb, press in replacement
Orientation SensitiveSome LED wedge bulbs are directional -- rotate 180 deg in socket if output appears dim
Dimmer CompatibilityNot recommended for use with incandescent-type dimmer switches

What Is Included

In the Box6 x 921 LED replacement bulbs
Not IncludedFixtures, lenses, wiring, installation hardware
Important Information
  • For 12V DC circuits only. Do not install in 120V AC household-style fixtures -- doing so will immediately destroy the bulb and may damage the fixture or wiring.
  • Always disconnect or switch off the fixture before removing the old bulb. RV interior 12V circuits are low voltage but can produce a spark at the socket.
  • If the LED appears dim or does not light after installation, remove the bulb, rotate it 180 degrees in the socket, and reinstall. LED chips are directional and socket polarity varies by fixture brand.
  • Not compatible with incandescent-style (resistive) dimmer switches. If your fixture is on a dimmer, verify the dimmer is rated for LED loads or replace the dimmer with an LED-compatible unit.
  • Do not install in enclosed fixtures that do not have ventilation -- while LEDs run much cooler than incandescents, some heat dissipation is still required for rated lifespan.
  • Cross-reference your existing bulb number before installing. The 921 is closely related to the 920, 922, and 912 -- all share the T10 wedge base and these replacements are compatible across that family.


Browse for more RV Accessories in the same category as this item:

RV Lighting > LED Light Bulbs
RV Lighting


$11.99
$20.49