Direct replacement main board assembly for WFCO WF-9560 series 60-amp power centers. Patented Auto Detect technology automatically charges lithium-ion and lead-acid batteries with separate optimized voltage profiles for each. Installs in ~10 minutes — 2 screws, 3 AC cables, 2 DC cables, no rewiring. 1,030W output. Limited lifetime warranty.
The WF-9560-AD-MBA Power Converter Main Board Assembly includes the exclusive, patented Auto Detect technology. This microprocessor-driven technology will recognize lithium-ion and lead-acid battery chemistries and automatically adjust the charging profile to match the battery type.
No more buttons. No more switches. An accurately charged battery gives RV owners peace of mind. Eliminating the risk of over- and under-charging, the WF-9560-AD-MBA will maximize your battery life with multi-stage charging and current monitoring in both lead-acid and lithium-ion profiles.
The WF-9560-AD-MBA has optimized charging for battery chemistry built in:
The WFCO WF-9560-AD-MBA is a direct drop-in replacement for the lower power converter section of any WF-9560 series power center, upgrading it to Auto Detect technology without replacing the entire unit and without rewiring. Two screws, three AC cable connections, and two DC cable connections are all that's required — installation takes approximately 10 minutes.
At 60 amps and 1,030 watts, this board delivers the capacity of the WF-9560 series with the intelligence of Auto Detect — separate optimized voltage profiles for lead-acid and lithium-ion batteries, three-stage charging, and multi-stage current monitoring. Backed by a limited lifetime warranty, a step up from the 2-year coverage on standard WFCO boards.
Patented microprocessor detects battery chemistry and adjusts to separate optimized voltage profiles for each — no buttons or switches
2 screws, 3 AC cables, 2 DC cables — no rewiring required. Direct replacement for the WF-9560 series lower converter section
Full 60-amp, 1,030-watt output capacity matches the original WF-9560 series specification
Backed by WFCO's limited lifetime warranty — stronger coverage than the standard 2-year on other WFCO boards
• (1) WFCO WF-9560-AD-MBA Main Board Assembly • Mounting hardware (2 screws) • Installation instructions
Lead-Acid — Three-Stage: Bulk: 14.4VDC (below 80% capacity) Absorption: 13.6VDC (above 80% capacity) Float: 13.2VDC (fully charged) Lithium-Ion — Optimized Profile: Voltage range: 13.2 – 14.6VDC / 13.6 – 14.6VDC Multi-stage process with cell balancing
Compatible with: Any WFCO WF-9560 series power center — replaces the lower converter section only. What you need: 2 screws, 3 AC cable connections, 2 DC cable connections — no rewiring of existing harness. Estimated time: Approximately 10 minutes. Dimensions: 7-1/16" W × 3-7/8" H × 9-1/2" D Consult a qualified RV technician if you are unfamiliar with RV electrical systems before attempting installation.