2000 watt true sine wave inverter/charger for RV, marine, work truck, and mobile power systems. Converts 12V battery power to clean 120V AC output, charges compatible battery banks at up to 100 amps, and includes a built-in 30 amp transfer relay.
The Xantrex Freedom XC Pro 818-2010 is a 2000 watt true sine wave inverter/charger designed for RVs, boats, commercial vehicles, work trucks, and other mobile power systems. It converts 12V DC battery power into utility-grade 120V AC power for sensitive electronics, appliances, tools, and selected AC loads.
Unlike the Freedom X inverter-only models, the Freedom XC Pro includes a built-in battery charger. The 2000W model features a 100 amp charger, a 30 amp transfer relay, configurable charging profiles, and support for flooded, gel, AGM, custom, and lithium iron phosphate battery charging.
Provides 2000 watts of clean continuous 120V AC inverter output
Built-in battery charger supports fast charging from shore or generator power
Automatically transfers connected loads between AC input and inverter power
Supports integration with compatible monitoring and control systems
The Xantrex Freedom XC Pro 818-2010 is commonly used in RVs, boats, vans, work trucks, service vehicles, class 8 trucks, and specialty vehicles that need both inverter power and battery charging in one compact unit. Typical uses may include powering entertainment equipment, computers, refrigerators, microwave loads, CPAP machines, tools, small appliances, and selected AC branch circuits while also charging the house battery bank from shore power or generator input.
• One Xantrex Freedom XC Pro 818-2010 2000W inverter/charger • Pre-installed DC ground enclosure lug • Plastic bushings for large DC cables • AC knockout hole plugs • Owner’s guide and safety labels as supplied by manufacturer
This inverter/charger requires proper DC battery cable sizing, overcurrent protection, AC input/output wiring, grounding, ventilation, battery bank capacity, and charger configuration. Xantrex specifies installation in a dry, cool, ventilated location and not in the same compartment as batteries or flammable liquids. Allow proper clearance for airflow, including clearance at the fan end and wiring access end. Configure the charger profile to match the installed battery type before use.
Inverter/charger installation involves high-current 12V DC wiring, 120V AC wiring, battery charging, transfer switching, and grounding requirements. Incorrect installation can cause electrical shock, fire, battery damage, equipment damage, or unsafe backfeed conditions. Installation should be performed by a qualified RV, marine, or electrical technician familiar with inverter/charger systems and battery charging requirements.
The Xantrex Freedom XC Pro 818-2010 is a 2000W true sine wave inverter/charger for 12V battery systems with a 100A charger and built-in 30A transfer relay. Verify battery voltage, battery chemistry, charger output, inverter load, transfer wiring, cable sizing, ventilation, and system integration needs before ordering.