JENSEN 3-zone wall stereo for RV entertainment systems with dual Bluetooth streaming, AM/FM tuner, HDMI pass-through with ARC/CEC, USB MP3 playback, rear RCA connections, and 8-speaker output.
The Jensen JWM65 is a wall-mount RV stereo designed for multi-zone audio and modern entertainment setups. With 3-zone / 8-speaker output, it can support separate audio zones inside and around the RV, making it useful for living areas, bedrooms, and exterior speaker setups.
This stereo includes dual Bluetooth streaming, front USB MP3 playback, AM/FM radio, HDMI input pass-through to rear HDMI output, and ARC/CEC support with compatible televisions. It is built for 12V DC RV electrical systems and includes a wireless remote control for convenient operation.
Supports Zone A/B and Zone C audio control with 8 speaker outputs
Bluetooth streaming with separate Zone AB and Zone C pairing options
Front HDMI input pass-through to rear HDMI output with ARC/CEC support
Front USB supports MP3 playback and convenient audio file access
This stereo is designed for 12V DC negative-ground RV electrical systems. Before ordering, compare the existing stereo’s cutout size, overall face dimensions, mounting depth, speaker wiring, RCA connections, HDMI/ARC needs, antenna connection, and available 12V power/ground wiring. Replacing an RV stereo may require wiring adaptation if the original harness, speaker zone layout, or mounting opening differs from the JWM65.
Before Starting: Disconnect 12V power before removing the old stereo or connecting wiring. Verify the installation area is clear of wires, plumbing, fuel lines, brake lines, or other components before cutting or modifying the mounting opening. Basic Installation Steps: 1. Confirm Fit: Compare the existing stereo cutout and available mounting depth to the JWM65 mounting dimensions. 2. Disconnect Power: Disconnect the negative battery cable or disable 12V power to prevent shorts. 3. Document Existing Wiring: Take photos of the old stereo wiring, speaker zones, antenna, RCA, HDMI, and power connections before removal. 4. Prepare Opening: Modify the opening only if needed and only after confirming there is clearance behind the mounting area. 5. Connect Wiring: Connect 12V power, ground, speaker wires, antenna, HDMI, RCA, and accessory wiring according to the installation manual. 6. Secure Stereo: Mount the unit using the proper screws and make sure the stereo is seated evenly. 7. Test Operation: Test AM/FM, Bluetooth, USB, HDMI/ARC, speaker zones, mute functions, remote control, and display dimming. 8. Finalize Install: Confirm all wiring is insulated, secured, and clear of sharp edges or heat sources.
Package Contents: • Jensen JWM65 3-zone wall stereo • 20-pin speaker wire / wiring harness as supplied by manufacturer • Wireless remote control NOT Included — May Also Need: • Speakers • AM/FM antenna • HDMI cable • RCA audio cables • Wiring adapters or connectors • Mounting screws, if existing/supplied hardware is missing or not suitable • Faceplate trim or cabinet modification materials This listing is for the stereo and supplied accessories only. Verify wiring, cutout size, speaker impedance, and connection requirements before installation.
View the Jensen JWM65 owner's manual here: Jensen JWM65 Owner's Manual
To confirm compatibility before ordering, have the following ready: • Existing stereo brand and model number • Current cutout and overall faceplate dimensions • Photos of the existing wiring harness and rear connections • Number of speaker zones and speakers currently connected • Whether HDMI ARC/CEC or RCA connections are needed • RV make, model, and year, if available Why this matters: RV stereos can differ by cutout size, wiring harness, speaker zone layout, mounting depth, and connection options. Matching the existing installation helps avoid ordering a stereo that requires extra modification or wiring adaptation.
Match this stereo by cutout size, mounting depth, 12V wiring, speaker zone layout, speaker impedance, and desired input/output connections.
If replacing or installing the stereo does not resolve the issue, check 12V power, ground, fuses, antenna, speaker wiring, HDMI cables, TV settings, Bluetooth pairing state, and zone controls before replacing additional parts.