The Arvika 7004AF gives A-frame travel trailer owners a purpose-built, full-kit solution for hauling up to four bikes -- no piecing together hardware, no guessing at compatibility. The lightweight aluminum main frame, rubber-coated steel arms, and 360-degree rotating clamps work together to hold bikes securely on paved highways and rough back roads alike.
Unlike universal trunk-mount or hitch racks, the Arvika 7004AF is engineered specifically for A-frame travel trailers. The steel trailer mounting bracket attaches directly to the trailer tongue structure, keeping the load low and centered rather than cantilevered off a hitch receiver. The 7000 series base accommodates two to four bikes, and this kit ships complete -- rack, arms, gutters, straps, and hardware are all in the box.
The main frame is aluminum for corrosion resistance and weight savings, while the bike-contact arms are steel with a soft rubberized coating that cushions frame tubes, top tubes, and handlebars against road vibration. Reinforcement arms are included and raise the total weight rating from 150 lbs (without) to 200 lbs (with), so you can safely carry four adult bikes without improvising bracing.
Lightweight corrosion-resistant aluminum construction keeps rack weight down and stands up to weather without rusting out over seasons of use.
Sturdy steel arms with soft rubberized coating protect your bike frames, handlebars, and bench mounts from scratches and vibration damage in transit.
Arm clamps rotate a full 360 degrees so you can secure bikes at the frame tube, handlebar, or bench mount -- no awkward repositioning required.
Ships with the rack base, reinforcement arms, bike mounting arms, 2 straps per bike, steel trailer mounting bracket, gutters, and 2 wheel stoppers -- ready to install out of the box.
The 7004AF is compatible with a wide range of A-frame travel trailers, including models from:
This rack is also adaptable for use on a vehicle in addition to a trailer. Confirm your vehicle or trailer tongue dimensions match the steel mounting bracket before ordering.
The 7004AF ships with standard gutters rated for bike tires under 2 inches wide -- appropriate for most road, hybrid, and standard mountain bikes. If you are carrying fat-tire bikes or e-bikes with wider tires, you will need to order wider gutters separately:
Using undersized gutters with wide or fat-tire bikes can cause the wheel to seat improperly and shift during transit. Verify your tire width before hitting the road.
The reinforcement arms included in this kit are not optional bracing -- they are what unlocks the full 200 lb capacity. Without them installed, the rated capacity drops to 150 lbs. Always install the reinforcement arms when carrying three or four bikes or any heavier adult bikes and e-bikes.
Reinforcement arms are included in this kit at no additional step -- they ship in the box and bolt into the existing frame mounting points.
The 7004AF is designed for owner installation without specialized tools. The steel trailer mounting bracket attaches to the A-frame tongue structure, and the rack base slides and locks into position. Removal for storage or when not in use is straightforward -- the rack does not require permanent modification to the trailer frame.
Tip: After the first road trip, re-check all mounting hardware torque points. Vibration from highway driving can work fasteners loose on a new installation. A quick inspection before each trip keeps bikes secure and protects your trailer and bikes from unexpected shifts.
Arvika backs the 7004AF with a Limited Lifetime Warranty covering defects in materials and workmanship for the original owner.