Direct-fit OE upgrade front shock for 2002–2008 Dodge Ram 1500 with 2WD (RWD) at stock height. Excludes Mega Cab. 46mm monotube nitrogen gas design. Stem upper / bar pin lower mount. Made in the USA.
The Bilstein 24-069274 B6 4600 Series Front Shock Absorber is the 2WD front shock for the third-generation Dodge Ram 1500 — covering the 2002 through 2008 model years in rear-wheel drive configuration. These trucks are some of the most widely used full-size pickups ever built, and many are still working hard at well over 100,000 miles. Worn front shocks on these trucks show up as a sloppy front end, reduced steering response, and the vague, underdamped feel that makes highway driving tiring and compromises stability.
The 4600 series, precisely valved for the 2WD Ram 1500 front suspension, replaces all of that with real front-end control — improved steering precision, reduced dive and float, and a more settled, composed ride whether you're running empty or loaded for a tow. It's the most cost-effective upgrade to extend the service life and restore the handling of your Ram 1500.
Application-tuned for the 2002–2008 2WD Ram 1500 front suspension — different part from the 4WD version
Fade-free front damping under truck loads — consistent performance whether empty or loaded for highway and towing
Covers 2002–2008 for 2WD — three additional model years beyond the 4WD version (24-069281)
Designed, engineered, and manufactured in the USA. Backed by Bilstein's limited lifetime warranty
2WD Only: This shock is for 2WD (RWD) Ram 1500 models only. The 4WD Ram 1500 front uses a different shock (24-069281 for 2002–2005 4WD). Verify your drivetrain before ordering. Excludes Mega Cab: This shock is not compatible with Ram 1500 Mega Cab models. Mega Cab configurations require a different front shock. Check your cab style before ordering.
Hardware Note: Includes lower spring mount only. Your original factory rubber bushings and steel washers from the old shock must be saved and reused during installation — do not discard them before removal. Boot Color: This shock includes a black boot (not blue) — note the difference from many other Bilstein 4600 applications. Sold Individually: One shock absorber per package. Order qty 2 for a complete front axle replacement. Stock Height Only: The B6 4600 Series is for stock-height applications only.
In The Box (Qty: 1 Shock Absorber): • Bilstein 24-069274 Front Shock Absorber • Black Protective Boot • Lower Spring Mount Hardware NOT Included / Reuse from Old Shock: • Upper rubber bushings (reuse OEM) • Steel washers (reuse OEM) • Second shock (sold individually — order qty 2 for a complete front pair)
24-025508 — Rear B6 4600 shock for 2002–2008 Dodge Ram 1500 (pairs with this front shock) 24-069281 — Front B6 4600 shock for 2002–2005 Dodge Ram 1500 4WD Replacing front and rear shocks together delivers the most balanced improvement in ride quality and handling on the Ram 1500 platform.
Bilstein Official Product Page Bilstein Technical Support: Website: www.bilstein.com Warranty: Limited Lifetime for original purchaser — B6 4600 series gas pressure shocks. Proof of purchase required. See full terms at Bilstein's website.
The 24-069274 fits the following vehicle at stock ride height with 2WD drivetrain, excluding Mega Cab. Sold individually — order two for a complete front replacement.
⚠️ Fitment cross-referenced across Excel Suspension, Amazon, LM Performance, Shock Surplus, AmericanTrucks, and Suspension Lifts. This shock is for 2WD only and excludes Mega Cab. For 4WD Ram 1500 (2002–2005), order Bilstein 24-069281. Always verify your drivetrain and cab configuration before ordering.