Keep your RV or boat's drinking water tasting clean and smelling fresh. Camco TastePURE 40207 is a ready-to-use, biodegradable cleaner formulated specifically for fresh water holding tanks and plumbing lines. It targets algae, slime buildup, and the musty or stale odors that develop when systems sit unused -- making it an ideal treatment at the start of camping season or after de-winterizing.
Fresh water tanks and supply lines are prone to algae growth, biofilm, and stale water odors -- especially after sitting through a winter layup or an extended period of non-use. Standard rinse water doesn't cut through slime deposits or neutralize the odors they cause. Camco TastePURE Spring Fresh Water Cleaner is formulated to do exactly that, working through your tank and plumbing lines to leave your system clean, fresh, and ready for drinking water use.
The formula is safe for RV and marine potable water systems and requires no mixing or pre-dilution. One ounce treats 20 gallons of tank capacity, so a single 1-gallon jug provides enough product for repeated seasonal treatments or multiple rigs. It is biodegradable and non-toxic when used as directed, making it a practical choice for systems that supply drinking and cooking water.
No mixing or dilution required. Add directly to your fresh water tank at the recommended dose and fill with water.
Formulated to break down algae and biofilm that accumulate in holding tanks and supply lines during storage.
Neutralizes the musty, stale, or plastic-like tastes and smells common in RV and boat fresh water systems.
Safe, biodegradable ingredients make this appropriate for fresh water systems in RVs and marine vessels.
This treatment is most effective in the following situations:
Add 1 ounce of TastePURE Spring Fresh Water Cleaner for every 20 gallons of tank capacity. Fill the tank with fresh water and allow the solution to circulate through lines by running each faucet briefly until the treated water appears. Let the solution sit for the recommended contact time, then drain fully and flush with fresh water before using the system for drinking or cooking. Always flush thoroughly after treatment.
TastePURE 40207 is formulated for use in potable water systems found in: