When your RV awning loses tension, rolls unevenly, or won't retract cleanly, the spring assembly is usually the culprit. The Carefree R00926BLK-A is the correct factory-replacement right hand spring assembly for Spirit, Fiesta, Simplicity, and Full-Timer awnings sized 18 to 25 feet -- restoring proper tension and smooth operation without modifying your existing awning hardware.
The spring assembly inside a manual RV awning does the heavy lifting every time you deploy or retract the fabric. Over time -- especially after seasons of UV exposure, hard retractions, or accidental over-extension -- the spring can weaken, bind, or break entirely. Using the OEM Carefree part ensures the correct spring rate and fitment for awnings in the 18-25 foot range, which require a stronger spring than shorter awning models.
This assembly is designed specifically for the right hand side of the awning as viewed from outside the RV facing the coach. Left and right assemblies are not interchangeable -- confirm your position before ordering.
Engineered for right hand side installation. Position is non-interchangeable with the left hand assembly -- verify your side before ordering.
Fits Spirit, Fiesta, Simplicity, and Full-Timer Carefree awning models in the 18 ft to 25 ft length range.
Black color blends with standard Carefree awning hardware and end caps for a clean, factory-matched appearance.
Manufactured by Carefree of Colorado, a domestic producer of RV awning systems and components for over 50 years.
The coil spring inside the roller tube stores energy as the awning is retracted, then releases that tension to assist deployment and maintain even fabric roll. When the spring is worn or broken, symptoms include:
Replacing only the spring assembly -- rather than the entire roller tube -- is the correct repair when the tube, fabric, and end caps are otherwise in good condition.
Spring assembly replacement is a DIY-accessible job for most RV owners comfortable working with ladders and basic hand tools. The general process involves: