Restore your rig's patio awning with a direct-fit replacement fabric engineered to Lippert's Solera standards. This 13.5-oz vinyl panel installs on 19-ft awning assemblies and is cross-compatible with leading OEM brands -- so whether you're running a Solera, Dometic, or Carefree arm system, this fabric drops in without modification. Heat-welded seams, a cold-weather-rated construction, and a clean Silver Fade finish make it a long-term replacement, not a temporary patch.
The V000334434 is a made-to-order replacement fabric panel sized at 18 feet 1 inch wide -- the correct fabric width for a 19-ft awning assembly. Per Lippert's standard sizing convention, fabric width runs approximately 11 inches shorter than the full awning assembly width, which is normal and expected. Do not order a fabric sized to match your assembly dimension.
The 8-foot projection (front-to-back depth when fully extended) delivers meaningful shade coverage for a camp chair setup, picnic table, or slideout entry. The Silver Fade colorway presents a neutral silver-to-white gradient on the topside; the underside is white for a clean, bright look from underneath.
Heavy-duty vinyl fabric resists UV degradation, mildew, and road grime better than lighter-weight fabrics common in budget replacements.
Formulated to remain flexible and crack-resistant at extreme low temperatures -- critical for four-season campers and northern storage climates.
Seams are thermally bonded rather than stitched, eliminating needle holes and reducing leak points at the most stress-prone areas of the fabric.
A poly cord is integrated along the valance hem for optional LED rope light or light track installation. Light track and LED lights are NOT included.
This fabric is engineered to fit Lippert Solera awning assemblies and is also compatible with Dometic and Carefree patio awning systems of the same size. If your existing OEM fabric has worn out or been damaged, this panel installs using your existing roller tube and arm hardware without sourcing brand-specific parts.
Measure the full width of your awning assembly -- rail to rail -- when it is fully extended and flat. A 19-ft assembly measurement means you need an 18'1" fabric (this part). The fabric is always approximately 11 inches shorter than the assembly dimension. If your assembly measures differently, select the fabric size that is closest to 11 inches less than your assembly width. Do not measure the old fabric edge to edge to get your size -- measure the awning arms.
Replacement awning fabric is cut and produced to your specified size at the time of order. This item cannot be returned or exchanged once ordered. Double-check your awning assembly measurement and color selection before placing your order.