Replace or upgrade the ceiling control assembly on your Coleman Mach rooftop AC unit with this Bluetooth-enabled, non-ducted ceiling assembly. Compatible with cool-only operation and ready to accept a heat strip (sold separately) for four-season comfort -- controlled from your smartphone or the integrated wall thermostat.
The Coleman Mach 9430-725 is a direct-replacement ceiling assembly for non-ducted Coleman Mach rooftop air conditioners. It brings Bluetooth connectivity to your existing unit, letting you manage temperature, fan speed, and mode from a compatible app -- without replacing the entire rooftop unit.
The assembly is heat strip ready out of the box, meaning it includes the wiring and control logic to run an optional electric heat strip once one is installed. No additional control board upgrades are needed when you decide to add heat later.
Pair with the Coleman Mach app to set schedules, adjust temperature, and change modes from your phone -- inside the coach or from outside.
Engineered for open-ceiling (non-ducted) RV applications. Airflow distributes directly from the ceiling unit into the living space.
Control board and wiring harness support an optional electric heat strip (sold separately). Add heat capability any time without replacing the assembly.
Designed to replace existing Coleman Mach non-ducted ceiling assemblies. Matches OEM mounting points and electrical connectors for straightforward swap-out.
On a Coleman Mach rooftop AC, the ceiling assembly is the interior portion of the unit -- everything that mounts to the ceiling inside your RV. It houses the evaporator coil, blower fan, drain pan, filter, control board, and the decorative ceiling grille. The rooftop condensing unit stays on the roof; only the ceiling assembly is replaced here.
This assembly includes the integrated Bluetooth module and control board pre-installed. You connect it to your existing rooftop unit using the standard Coleman Mach wiring harness.
The Bluetooth control module is built into this ceiling assembly. Pair it directly with the Coleman Mach Connect app (iOS and Android) for wireless climate management. No add-on dongle or separate purchase needed for Bluetooth functionality.
This assembly is rated "heat ready," which means the control board supports a Coleman Mach electric heat strip, but the heat strip itself is not included. If you want heating capability, you will need to purchase and install a compatible Coleman Mach heat strip separately. Once installed, the ceiling assembly will recognize and control it automatically through the app or thermostat.
You do not need a heat strip installed for this assembly to function. It operates as a standard cool-only ceiling assembly until a heat strip is added. The "heat ready" designation refers to built-in support, not included hardware.
This ceiling assembly is a drop-in replacement for compatible Coleman Mach non-ducted units. Installation typically involves:
No rooftop work is required for a straight ceiling assembly swap. Power should be disconnected at the breaker before beginning any work on the unit.
The air filter on non-ducted Coleman Mach ceiling assemblies slides out from the bottom grille panel. Clean or replace the filter every 30 days during heavy use. A clogged filter reduces airflow and forces the compressor to work harder, shortening unit life.
Coleman Mach electric heat strips (various BTU ratings) -- sold separately. Compatible with Coleman Mach 8 series and compatible non-ducted rooftop units. Check your existing unit model number before ordering to confirm compatibility.