A versatile mid-drop Flash FORCE adjustable steel ball mount for 2" receivers. Provides 5" drop / 5-1/2" rise for trucks, SUVs, and trailers that need more height correction than the compact 3" model. Includes reversible 2" and 2-5/16" chrome-plated hitch balls. Rated up to 8,000 lb with the 2" ball and 10,000 lb with the 2-5/16" ball. 1,000 lb max tongue weight.
The Fastway Flash FORCE 67-00-7350 is the mid-drop 2" receiver model in the Flash FORCE adjustable steel ball mount family. With a 5" drop and 5-1/2" rise, it is a strong fit for everyday towing setups where a standard fixed ball mount may not provide enough height correction to keep the trailer level.
This model gives you the flexibility of an adjustable ball mount with the strength of solid steel construction. The reversible dual-ball platform lets you switch between 2" and 2-5/16" trailer couplers, while the stowable design rotates beneath the vehicle when not in use to help protect shins, tailgates, and garage doors. It is a practical choice for utility trailers, campers, boats, cargo trailers, and general bumper-pull towing.
Mid-range height correction for tow vehicles and trailers that need more adjustment than a short-drop ball mount
Includes both 2" and 2-5/16" chrome-plated hitch balls so you can tow multiple trailer coupler sizes with one mount
Built from solid steel for dependable strength, with a corrosion-resistant coating for outdoor towing conditions
Rotates beneath the vehicle when not in use to help avoid shin hits, tailgate damage, and unnecessary garage clutter
The Flash FORCE 67-00-7350 is a ball mount — it does not provide weight distribution or sway control. If tongue weight causes rear sag, steering lightness, braking concerns, or trailer sway, a weight distribution hitch may be the correct solution instead of a standard ball mount. Capacity depends on ball size: This model is rated up to 8,000 lb with the 2" ball and up to 10,000 lb with the 2-5/16" ball. Maximum tongue weight is 1,000 lb. Never exceed the lowest-rated component in your towing system, including the ball mount, hitch ball, receiver hitch, tow vehicle, and trailer.
The 67-00-7350 provides a 5" drop or 5-1/2" rise, making it a good choice when your tow vehicle receiver and trailer coupler are moderately different in height. Confirm your measurement before ordering. Step 1: Park the tow vehicle and trailer on level ground. Step 2: Measure from the ground to the inside top edge of the tow vehicle's receiver opening. Step 3: Measure from the ground to the bottom of the trailer coupler when the trailer is level. Step 4: Compare the two measurements. If the receiver is higher than the coupler, you need drop. If the coupler is higher than the receiver, you need rise. Example — Drop: Receiver at 23" and coupler at 18" = 5" drop → 67-00-7350 is the correct Flash FORCE size. Example — Rise: Coupler at 24-1/2" and receiver at 19" = 5-1/2" rise → 67-00-7350 is correct when used in rise orientation. If your required drop or rise is greater than this model provides, choose a larger Flash FORCE model.
Installation Steps: 1. Confirm Drop or Rise: Verify whether your setup needs up to 5" drop or up to 5-1/2" rise 2. Select Ball Size: Use the 2" or 2-5/16" ball that matches your trailer coupler 3. Set Ball Height: Adjust the ball platform to the correct height and secure it with the adjustment pins 4. Insert into Receiver: Slide the shank into your 2" hitch receiver in the correct orientation 5. Secure the Mount: Install the appropriate hitch pin or locking pin for your receiver 6. Connect Trailer: Lower the trailer coupler onto the hitch ball and latch the coupler securely 7. Verify Level: Confirm the trailer rides level before towing Always verify the ratings of your tow vehicle, receiver hitch, ball mount, hitch ball, and trailer before towing.
In The Package: • (1) Flash FORCE Adjustable Steel Ball Mount Platform • (1) Adjustable Height Shank for 2" Receiver • (1) 2" Chrome-Plated Hitch Ball • (1) 2-5/16" Chrome-Plated Hitch Ball Sold Separately: • Locking pins / receiver lock hardware
Fastway Trailer Products: Website: fastwaytrailer.com/contact-us Made in the USA Fastway is a brand of Progress Mfg., a leading manufacturer of towing products including the Fastway and Equal-i-zer hitch lines.
Flash FORCE models use solid steel construction, dual chrome balls, and a stowable adjustable design. Select by receiver size and required drop/rise.
Need less drop in a 2" receiver? See the 67-00-7130 for 3" drop. Need more drop in a 2" receiver? See the 67-00-7570 for 7" drop. Need a 2-1/2" receiver version with higher 2-5/16" ball capacity? See the Flash FORCE HD models 67-00-7455 and 67-00-7675.