Home > Covers > Class A RV Covers >

UnitedCovers 5-Layer Class A RV Cover UC-CA-2428 - 24' to 28'

UnitedCovers 5-Layer Class A RV Cover UC-CA-2428 - 24' to 28'
UnitedCovers 5-Layer Class A RV Cover UC-CA-2428 - 24' to 28'
 
Alternative Views:


: $209.99
Part Number: UC-CA-2428
Manufacturer: UnitedCovers
NOTE: Ground Shipping Only

Quantity in Stock :11

Free Shipping
Availability: In Stock
Qty:

 
UnitedCovers 5-Ply Top Protection Lifetime Warranty UnitedCovers 5-Layer Class A RV Cover -- Fits 24 to 28 Foot Motorhomes

Stop weather from eating into your RV investment. The UnitedCovers 5-Layer is engineered specifically for Class A motorhomes between 24 and 28 feet, wrapping your rig in five layers of polypropylene-and-film construction on top and three layers on the sides. It breathes where it needs to, seals where it counts, and goes on and comes off without a crew.

Full-Season Protection Built for Class A Motorhomes

Class A coaches sit tall, run wide, and collect every bit of UV, wind-driven rain, bird drop, and tree sap the sky can throw at them. A generic tarp traps moisture and flaps itself to shreds. The UnitedCovers 5-Layer uses a micro-porous film layer that repels liquid water while allowing water vapor to escape, so condensation cannot build up under the cover and invite rot or mildew into your sidewalls, seams, and slide gaskets.

The five-layer top panel extends downward over the upper sides, giving the most weather-exposed surfaces double-duty coverage. Three-layer side panels continue the protection all the way to the hem. Elastic corners at the front and rear pull the cover snug so it conforms to your coach's profile rather than billowing and chafing in wind. Adjustable buckle straps cinch the cover from below and eliminate slack across the full length of the rig.

5-Layer Top Panel

Four polypropylene PLUS layers plus one micro-porous film layer. Blocks UV, rain, hail, and debris while shedding heat away from your rooftop ACs and vents.

3-Layer Side Panels

Two polypropylene PLUS layers plus one micro-porous film layer on all four sides. Blocks over 98% of dirt and dust and prevents mildew buildup against your slideout seals and paint.

Zippered Access Panels

Heavy-duty zippered entry points let you get into your motorhome, access the shore power inlet, or retrieve gear without pulling the entire cover off.

Built-In Ventilation

Integrated roof vents promote airflow under the cover, reducing interior heat buildup and preventing the stale, damp environment that damages upholstery and cabinetry.

Fit and Securing System

The slip-seam design shapes the cover to follow your coach's contours rather than hanging off it in flat panels. This reduces wind loading and stops the cover from acting like a sail. Weighted buckles make it easy to throw straps under the chassis and cinch them without crawling on the ground. Elastic hems at the front and rear corners hold their grip even in sustained winds.

A dedicated ladder cap shields the cover fabric from sharp ladder rungs on the rear of your coach -- a common failure point on generic covers that simply drape over the ladder. Gutter guards protect the cover edge where rain gutters could otherwise cut into the fabric over time.

Reflective Panels for Safety and Heat Control

Reflective material integrated into the cover panels does two jobs: it reflects sunlight to keep interior temperatures lower during storage, and it increases visibility of your parked rig at night or in low-light conditions -- an underrated feature in crowded campgrounds and storage yards.

AC Unit Clearance

The UnitedCovers 5-Layer is designed with the roofline of Class A coaches in mind. The cover accommodates up to three rooftop air conditioning units without requiring you to remove them before covering. Roof vents, antennas, and standard Class A coach profiles are accounted for in the cover's dimensions and panel shaping.

What Is Included in the Box
  • UnitedCovers 5-Layer Class A RV cover (gray) sized for 24-28 ft coaches
  • Repair patch kit for field fixes
  • Zippered storage bag for off-season or travel storage

Installation Notes

No tools are required to install this cover. The typical process for a 24-28 ft Class A is a two-person job -- one on the roof to unfold and pull the cover from front to rear, one on the ground to guide the sides down and attach the buckle straps. The weighted buckle design speeds this up considerably compared to tie-down loops that require threading. Once in position, tighten the adjustable straps, snap the elastic corners, and the cover is secure.

Storage and Maintenance Tips
  • Clean the cover with mild soap and cool water -- do not machine wash or use bleach.
  • Allow the cover to dry completely before folding and storing in the included bag to prevent mildew in the bag itself.
  • Inspect the adjustable straps and buckles each season for UV degradation and replace if cracked.
  • Use the included patch kit on any small tears immediately -- small holes grow quickly under wind stress.
  • Remove accumulated snow loads promptly to relieve stress on the stitching and buckle anchors.
Recommended For

Long-term outdoor storage, seasonal layup, and covered-lot parking where a carport or building is not available. Equally suited to winter snowbelt storage and hot-climate UV protection in the Southwest or Florida. Not intended as a driving cover or a permanent weatherproofing substitute for roof resealing.

Cover Dimensions

Cover Length 28.5 ft (342 in)
Cover Width 8.92 ft (approximately 107 in)
Cover Height 10.08 ft (approximately 121 in)
Fits RV Length 24 ft to 28 ft Class A motorhomes
Weight 25 lbs

Material Construction

Top Panel Layers 5-ply: 4x polypropylene PLUS + 1x micro-porous film
Side Panel Layers 3-ply: 2x polypropylene PLUS + 1x micro-porous film
Color Gray
Breathability Micro-porous film allows vapor out, blocks liquid water in
Dirt and Dust Block Over 98% blocked
Stitching Double-line reinforced at all panel junctions

Features and Hardware

AC Unit Clearance Up to 3 rooftop AC units
Zippered Panels Yes -- heavy-duty, for entry and access
Roof Vents Built-in, promote airflow under cover
Hem Type Elastic at front and rear corners
Strap System Adjustable buckle straps, weighted for under-chassis routing
Ladder Cap Yes -- protects cover from rear ladder edges
Gutter Protection Yes -- reinforced edges at rain gutter contact points
Reflective Panels Yes -- nighttime visibility and heat reflection
Tools Required None

Protection Ratings

UV Protection Yes -- reflective and UV-blocking construction
Water Resistance Water-repellent with breathable vapor release
Snow and Ice Yes -- designed for winter storage use
Hail Resistance Multi-layer construction provides impact buffering
Mildew and Rot Resistance Yes -- micro-porous film prevents moisture entrapment

What Is in the Box

RV Cover 1x UnitedCovers 5-Layer, gray, 24-28 ft Class A
Patch Kit Included for field repairs
Storage Bag Zippered bag for folded cover storage

Warranty

Manufacturer Warranty Lifetime manufacturer warranty
Part Number UC-CA-2428
Manufacturer UnitedCovers
Important Information -- Read Before Installing
  • This cover is sized for Class A motorhomes 24 to 28 feet in overall length. Measure your RV from bumper to bumper before ordering -- do not estimate.
  • Slideouts must be retracted before installing the cover. This cover is not designed to accommodate extended slideouts.
  • Do not install this cover over a wet or dirty RV surface. Trapped debris can abrade the paint and finish during wind movement.
  • This cover is designed for stationary storage use only. Do not drive with the cover on the vehicle.
  • Remove accumulated snow promptly to prevent excess load stress on the cover's seams and buckle attachment points.
  • The micro-porous film layer resists liquid water but is not a substitute for proper roof resealing. Inspect and reseal your roof before long-term covered storage.
  • The ladder cap and gutter guards protect the cover, not the ladder or gutters themselves -- inspect your RV's ladder and gutter edges for sharp burrs that could accelerate cover wear.
Protecting your RV with a quality cover is essential for maintaining its value and longevity. RVs are significant investments that are often exposed to harsh weather conditions, making them susceptible to damage from corrosion, mold, and UV rays. Unlike standard vehicles, RVs serve as mobile homes for many, and a cover can provide added insulation and privacy, enhancing your comfort while protecting against the elements. By investing in an RV cover, you reduce wear and tear, ensuring that your RV remains in excellent condition for years to come.

How To Measure Your RV:

Length: Measure the longest distance from the front to the rear of the RV, including bumpers, spare tires, and ladders. Measure to the front of the bumper or the bunk area, whichever is farther.

Height: Measure the highest point of the RV's sidewalls from the top of the roof to the outside frame, excluding ground clearance and roof-mounted accessories.


How to Install Your RV Cover:

1. Identify the front of the cover by locating the "Front" tag on the interior.
2.
Lay the cover lengthwise on the ground, inside out, with the exterior facing up.
3.
Fold the sides toward the center and roll the cover from the rear, leaving the front end loose.
4.
Position the rolled cover at the rear of the RV near the ladder.
5.
Loosen the roll slightly, then climb the ladder while holding the front end.
6.
Pull the cover onto the roof gradually until you have a strip covering the entire roof.
7.
Starting at the front, unfold the cover side to side, letting it drape down the sides as you move to the rear.
8.
Ensure the corner opposite the ladder is positioned under the cover’s corner.
9.
Climb down while bringing the cover down with you, then adjust the cover as needed.

Removal:

1. Undo all straps and zippers on the cover.
2.
Lift the front of the cover to the top of the RV.
3.
Pull the cover down from the rear.

For Cleaning:

Proper care of your RV cover is essential for maintaining its performance and water resistance. Contaminants like dirt and grease can damage the cover, so regular washing is recommended for long-lasting protection.

You can wash the cover by hand or in a washing machine. For hand washing, install the cover on your RV, rinse it with a hose, then use a cloth and multi-purpose cleaner to scrub. Rinse again and either towel dry or let it air dry.

For machine washing, use the largest machine available, set it to gentle mode, and wash with mild powder detergent in cold water—avoid bleach and fabric softeners. Rinse the cover twice to remove all detergent, and always air dry.



Browse for more RV Accessories in the same category as this item:

Covers > Class A RV Covers
Covers