Home > Electrical > RV Converters >

Progressive Dynamics PD4645 Inteli-Power 4600 Converter/Charger, 45 Amp

Progressive Dynamics PD4645 Inteli-Power 4600 Converter/Charger, 45 Amp
Progressive Dynamics Inteli-Power 4600 Converter/Charger, 45 Amp
 
List Price: $405.99
: $338.49
You save $67.50!
Part Number: PD4645V
Manufacturer: Progressive Dynamics

Quantity in Stock :25

Free Shipping
Availability: In Stock
Qty:

 

The Progressive Dynamics PD4645 Inteli Power 4600 Converter Charger is built as an upgrade or replacement for many factory installed RV power center converters. If you have an older Parallax, Magnetek, or WFCO converter that is hard on batteries or struggling to keep up with todays loads, the PD4645 gives you a modern, efficient 45 amp converter with smart charging built in.

This unit is part of the 4600 series replacement sections. It is designed to fit the lower converter compartment of compatible AC and DC distribution panels, so you keep your existing breaker and fuse layout while upgrading only the converter and charger electronics. That makes it a clean retrofit for many RVs without cutting into walls or replacing the entire power center.

Four stage Charge Wizard technology

The PD4645 includes the Progressive Dynamics Charge Wizard system, which constantly monitors the battery and automatically switches between four charging modes to speed up charging while protecting the battery from overcharging. In boost mode the converter quickly charges low batteries. Normal mode completes the charge, storage mode maintains a full battery at a lower voltage, and a periodic desulfation mode helps reduce stratification on flooded batteries. This four stage operation helps extend battery life and reduces watering needs compared to older single voltage converters.

Cleaner 12 volt power for RV equipment

With up to 45 amps of DC output, the PD4645 supplies solid 12 volt power to your RV lights, fans, pumps, controls, and accessories while also charging the house battery. The output is regulated to about 13.6 volts under normal load with low ripple and noise for sensitive electronics. Typical efficiency is over 80 percent, which keeps waste heat down and improves performance on shore power or generator.

Protection features built in

To protect both the converter and your RV, the PD4645 includes multiple safety features. These include reverse battery protection, electronic current limiting, low and high AC input protection, automatic thermal shutdown, and a variable speed cooling fan that only runs as needed. If a battery is accidentally connected backwards, accessible fuses protect the converter.

Replacement compatibility and fit

The PD4645 is designed as a direct replacement section for several common 45 amp RV converters. It replaces many Parallax or Magnetek 6345, 7345, and 8345 units, as well as WFCO 8945 converters when installed with the included metal enclosure and hardware. The assembly is sized to fit an opening of roughly 12 inches wide by 4.75 inches high by 7.25 inches deep in compatible power centers.

Key features

  • Inteli Power 4600 series 45 amp converter and battery charger
  • Four stage Charge Wizard charging system built in to help extend battery life
  • Provides clean regulated 13.6 volt DC power with low ripple for RV electronics
  • Upgrade or replacement for many existing RV power center converter sections
  • Designed to replace Parallax or Magnetek 6345, 7345, 8345, and WFCO 8945 units when used with the supplied enclosure
  • Reverse battery protection, electronic current limiting, high and low AC input protection
  • Automatic variable speed cooling fan and thermal shutdown for reliable operation
  • Made for easy installation into compatible one piece AC and DC distribution panels

Specifications

  • Model: PD4645 Inteli Power 4600 series
  • DC output current: 45 amps maximum
  • Nominal DC output voltage: 13.6 volts
  • Full load output voltage: greater than 12.6 volts
  • Input voltage: 105 to 130 volts AC, 50 to 60 hertz
  • Maximum continuous input power: about 725 watts
  • Typical efficiency: greater than 80 percent
  • Cooling: automatic variable speed fan
  • Approximate dimensions: about 13.25 inches wide by 8 inches deep by 5.38 inches high overall converter section size
  • Weight: about 9 pounds

If you are upgrading an older 45 amp converter that is hard on batteries or no longer holding stable voltage, the Progressive Dynamics PD4645 Inteli Power 4600 Converter Charger gives you a modern, smart charging replacement that drops into many existing RV power centers with minimal rework.


Maximum DC Output Current 45-AMPS
Maximum Continuous Input Power 725 WATTS
No Load DC Output Voltage 13.6 VDC
No Load Voltage Tolerance +/- .3 VDC
Full Load Output Voltage > 12.6 VDC
Ripple and Noise Voltage <50 MV RMS
Input Voltage Tolerance 105 - 130 VAC
Input Voltage Frequency 50-60 HZ
Peak Inrush Current 32-AMPS
Efficiency (Typical) > 80%
Reverse Battery Protection YES
Electronic Current Limiting YES
Cooling Fan Auto-variable speed
Back Up Thermal Protection YES
Storage Temperature 20-80C
Operating Temperature 0-50C
Hipot Voltage Test 1240 V @ INPUT TERMINALS
Over Voltage Protection YES
Under Voltage Protection YES
Full Function Charge Wizard YES
Weight 8 LB. 9 OZ.
Dimensions Fits 12"W x 4.75"H x 7.25"D opening
Replacement Cross List: Model #
WFCO 8945
MAGNATEK 6345
PARALLAX 7345


Browse for more RV Accessories in the same category as this item:

Electrical > RV Converters
Electrical