This OEM-grade rubber LP gas hose is built to connect RV propane appliances to your coach's gas supply. At 60 inches long with a 1/4" male pipe thread on one end and a 1/4" quick-disconnect male fitting on the other, it covers a wide range of replacement and new-install situations. UL and CSA listed for LP gas service -- not a universal garden hose substitute.
Running a new propane appliance, replacing a cracked or hardened factory hose, or relocating a gas-fired device in your rig? The JR Products 07-31125 gives you 60 inches of flexible rubber hose built specifically for low-pressure LP gas service in recreational vehicles. It ships ready to install -- no field assembly required.
Both ends are pre-terminated: a standard 1/4" male NPT fitting threads into most RV appliance inlets and gas manifold ports, while the 1/4" quick-disconnect male end snaps securely into a compatible QD female receptacle on the coach side. That combination makes routing clean and service quick.
1/4" male NPT on the appliance end, 1/4" quick-disconnect male on the supply end -- no crimping or field fittings needed.
Flexible rubber hose resists kinking and cracking through temperature swings common in RV propane systems.
Independently certified for LP gas appliance service, satisfying most campground and inspection requirements.
Five feet of hose provides enough slack to route around cabinet walls and still reach appliances set back from the supply port.
This hose is designed for low-pressure LP appliance service -- typically the downstream side of the RV propane regulator. Common uses include:
The 1/4" NPT male end is a standard US pipe thread that mates with most RV appliance inlet ports and brass tee fittings. The quick-disconnect male end requires a matching 1/4" QD female receptacle on the supply side -- verify your coach has a QD female port before ordering. If your supply line terminates in a standard flare or POL fitting, a QD adapter may be required.