Home > Wheels & Brakes > Wheel & Axle Accessories >

Lippert 141286 10" Brake Hub Assembly 6 on 5.5" Bolt Pattern 1/2" Stud 4400 Lb Axle Rating

Lippert 141286 10-inch brake hub assembly with 6 on 5.5-inch bolt pattern and 1/2-inch studs rated for 4400 lbs, pre-installed bearings
Lippert 10" Brake Hub Assembly, 6 On 5.5", 1/2" Stud - 4,400 Lbs
 
: $69.08
Part Number: 141286
Manufacturer: Lippert

Quantity in Stock :25

Free Shipping
Availability: In Stock
Qty:

 
Lippert 4,400 Lb Axle Rating Pre-Installed Bearings Lippert 141286 -- 10" Brake Hub Assembly, 6 on 5.5" Bolt Pattern, 1/2" Stud

A ready-to-install replacement hub assembly for Lippert-equipped RV trailers. The 141286 ships with bearing cones, seal, and grease already in place, so you spend less time on setup and more time on the road. Rated for 4,400 lb axle loads and compatible with 14.5" to 16.5" wheels on a standard 6 on 5.5" bolt circle.

Drop-In Hub Replacement for Common RV Trailers

The Lippert 141286 is a complete 10-inch electric brake hub assembly designed for travel trailers, fifth wheels, and toy haulers running Lippert axles with the 6 on 5.5" (6-lug, 5.5" bolt circle diameter) wheel pattern. The solid iron hub body is built to handle the stop-and-go demands of highway towing, and because bearing cones, the grease seal, and pre-packed grease come installed at the factory, this is a genuine bolt-on replacement with no separate bearing kit required.

Cross-referenced OEM part numbers from multiple major RV brands confirm wide fitment across popular trailer lines. If your current hub is showing wear, scoring on the drum surface, or a seized bearing, this assembly is the correct direct replacement -- not a universal fit that requires shimming or machining.

Pre-Installed Bearings and Seal

Bearing cones, grease seal, and packed grease are installed at the factory. No separate bearing kit or press required for installation.

Solid Iron Construction

Durable cast iron hub and drum withstand heat buildup from repeated braking without warping or cracking under rated loads.

4,400 Lb Axle Rating

Rated for axles up to 4,400 lbs. Matches the load capacity of standard Lippert 4.4K trailer axle assemblies.

Wide Wheel Compatibility

Fits wheel sizes from 14.5" to 16.5", covering the most common tire and rim combinations found on mid-size travel trailers.

Fitment and Cross-Reference

This hub assembly is cross-referenced by several major RV manufacturers as a direct OEM replacement. Confirmed cross-reference part numbers include:

  • Gulf Stream -- Part No. 491CZ3
  • Heartland -- Part No. 0126853
  • Jayco -- Part No. 24247
  • Keystone RV -- Part No. 238090

Verify your existing bolt pattern (6-lug on a 5.5" bolt circle) and stud size (1/2" diameter) before ordering. The 6 on 5.5" pattern is standard on many Dexter and Lippert 4,400 lb axles but is not universal -- measure across opposing studs to confirm before purchase.

Ready to Install: Because bearing cones, the grease seal, and factory-packed grease are already in place, this hub can go straight onto the spindle. Torque spindle nut to the axle manufacturer's specification and install the dust cap -- no bearing press or separate kit needed.

What's Included

  • 1x Lippert 141286 10" brake hub and drum assembly
  • Bearing cones (pre-installed)
  • Grease seal (pre-installed)
  • Pre-packed bearing grease
  • Wheel studs (1/2" diameter, installed)
Note on Brake Shoes and Magnets: This is a hub and drum assembly only. Electric brake shoes, brake magnets, and backing plate hardware are NOT included. If your brake shoes or electromagnet are also worn, order those components separately before completing the repair.

Installation Tips

Maintenance Reminders:
  • Inspect and re-pack bearings with fresh grease at least once per season or every 10,000 miles of towing, whichever comes first.
  • Check the grease seal for deformation or contact damage after the first tow season.
  • Torque lug nuts to your wheel manufacturer's specification -- typically 90-110 ft-lb for 1/2" studs on cast iron hubs.
  • After installation, perform a brake controller adjustment and short-stop test at low speed before highway towing.

Warranty

Covered by Lippert's limited 1-year manufacturer warranty against defects in materials and workmanship from the date of purchase.

Hub Assembly Specifications

ManufacturerLippert Components
Part Number141286
UPC848150045119
Drum Diameter10 inches
Axle Weight Rating4,400 lbs
Hub ConstructionSolid cast iron
Assembly WeightApproximately 10 lbs
WarrantyLimited 1-year manufacturer

Wheel and Bolt Pattern

Bolt Pattern6 on 5.5" (6-lug, 5.5" bolt circle)
Stud Size1/2" diameter
Compatible Wheel Sizes14.5" to 16.5"
Lug Count6

Pre-Installed Components

Inner Bearing ConeIncluded, pre-installed
Outer Bearing ConeIncluded, pre-installed
Grease SealIncluded, pre-installed
Bearing GreasePre-packed at factory
Wheel StudsIncluded (1/2", installed)

OEM Cross-Reference Numbers

Gulf Stream491CZ3
Heartland0126853
Jayco24247
Keystone RV238090
Lippert (Vendor)LIP141286

Brake System Compatibility

Brake TypeElectric drum brake (10" x 2.25" shoe)
Axle TypeLippert / Dexter 4,400 lb trailer axle
ApplicationTravel trailer, fifth wheel, toy hauler
Important Information
  • This assembly is rated for a maximum 4,400 lb axle load. Do not use on axles rated above this limit.
  • Brake shoes, electromagnet, backing plate hardware, and dust cap are NOT included -- order separately if needed.
  • Confirm your bolt pattern is 6 on 5.5" (not 6 on 5.0" or 6 on 6.5") before purchase. Measure across opposing studs to verify.
  • Confirm stud size is 1/2". Using incorrect wheel hardware on mismatched studs is a safety hazard.
  • Do not exceed the rated wheel size range of 14.5" to 16.5".
  • Always torque spindle nut and lug nuts to specification. Improper torque can cause bearing failure or wheel separation.
  • Inspect the axle spindle for wear or damage before installing a new hub. A scored spindle will destroy new bearings prematurely.


Browse for more RV Accessories in the same category as this item:

Wheels & Brakes > Wheel & Axle Accessories
Wheels & Brakes


$11.99
$12.80