Lippert 2024121188 -- 20 ft Adjustable Collapsible RV Sewer Hose Support
Keep your RV sewer hose off the ground, properly angled, and draining fast. This 20-foot support system collapses for easy packing and flexes to route around campsite obstacles -- no more sewer hose pooling waste on the ground between sites.
A sewer hose that lies flat on the ground traps waste and slows drainage. The Lippert 2024121188 lifts and slopes your hose continuously from the RV outlet to the campground clean-out, letting gravity do the work. The 20-foot supported run handles most standard hookup distances, including sites where the sewer inlet is offset to one side or requires a curved path.
The collapsible accordion-style sections snap to different heights at each support cradle, so you can dial in a consistent downward angle along the entire run. The black color blends with typical campsite surroundings and resists showing dirt.
Supports sewer hose runs up to 20 feet -- long enough for most RV campsites without needing an extension.
Each support leg adjusts independently so you can create a continuous downward slope regardless of ground conditions.
Accordion-style spine flexes to curve around fire rings, curbs, or other campsite obstacles rather than forcing a straight-line run.
Collapses down to a fraction of its extended length and stows flat in a sewer bay or gear compartment alongside your hose.
Unsupported sewer hose sags between connection points, creating low spots where liquid waste and solids accumulate instead of draining cleanly. Over time this leads to slow tanks, odors at the hose, and extra flushing time. A properly sloped run empties tanks faster, reduces odors, and puts less stress on hose fittings at both ends.
At 20 feet, the Lippert 2024121188 covers the majority of campsite sewer hookup scenarios. Sites where the dump inlet is unusually far from the coach, or where an elbow adapter is needed, may require a short hose extension beyond the supported run -- the support itself handles the elevated, sloped portion.
The flexible spine allows the support to arc left or right, making it practical for sites where the dump inlet is not directly behind the rig. Route the hose in a gentle curve and the support holds its shape once positioned.
Each section of the support snaps open from its collapsed position. Once the full 20-foot length is extended and positioned, the individual support legs are set to the desired height. At teardown, legs fold inward and the entire spine compresses into a compact bundle. No tools required for setup or breakdown.
The cradle is sized for standard 3-inch RV sewer hose, which is the industry standard for Class A, B, C, fifth-wheel, and travel trailer waste systems. Most Rhino Flex, Camco TastePURE, and Valterra Dominator hoses seat securely in the support cradle without additional adapters.
When collapsed, the support stows alongside or inside your sewer hose storage tube, or flat in a basement compartment. The black UV-resistant plastic resists fading and cracking through repeated heat and cold cycles. Lightweight construction means it adds minimal weight to your gear loadout.