Lost or cracked your Waste Master cam lock cap? This is the exact OEM replacement. The Lippert 359954 male cam lock cap seals off your Waste Master hose connector when the rig is not hooked up to a sewer connection, keeping odors contained and the cam lock mechanism clean and protected between uses.
The Waste Master system uses a cam lock quick-connect design that makes hookup and breakdown fast and hands-off -- but only when every component is in good shape. The protective end cap is one of the most commonly misplaced or damaged pieces of the system. Without it, the connector is exposed to road grime, UV, and odor blowback.
The 359954 replaces the OEM cap directly. It threads and locks onto the male cam lock fitting on your Waste Master hose the same way the original does -- no adapters, no improvising with rags or tape.
Direct replacement for the original Waste Master cam lock cap. No modification required.
Sized to fit the standard Waste Master male cam lock connector on the hose end.
Engages the same cam lock mechanism as your existing fittings for a secure, no-tools seal.
Only 0.25 lbs. Easy to store a spare in your bay or toolkit.
When your RV is in transit, parked dry, or set up without sewer hookup, the cam lock cap plugs and seals the male fitting at the end of the Waste Master hose. This prevents sewer gas from venting through the hose end and protects the cam lock lugs from being bent or broken by road debris.
This cap is designed specifically for the Lippert Waste Master cam lock hose system. The Waste Master line uses a 3-1/2 in. cam lock standard throughout, so this cap is compatible with Waste Master hoses and fittings carrying that same diameter. It is not designed for standard bayonet-style or threaded sewer fittings used on non-Waste Master systems.