When your Waste Master cam lock connector wears out, cracks, or no longer seals reliably, this is the exact OEM replacement you need. Part 360578 restores the leak-resistant cam lock connection between your Waste Master hose and the sewer outlet -- keeping black and gray tank dumps clean, contained, and odor-free at the hookup point.
The cam lock connector is one of the most-handled components on any Waste Master sewer system. Every hookup and breakdown cycles the connector through stress, UV exposure, and contact with waste chemicals. Over time the cam arms can weaken and the sealing surfaces degrade -- leading to drips or slow leaks right at the sewer outlet.
Lippert part 360578 is the direct OEM replacement designed specifically for the Waste Master system. It uses the same cam lock geometry and sealing design as the original, so installation is a straightforward swap with no adapters or modifications required.
Engineered to the exact Waste Master cam lock specification for a secure, repeatable connection every dump cycle.
Cam arms clamp firmly against the sewer outlet to prevent drips and odor leakage during and after dumping.
Designed solely for Lippert Waste Master sewer systems -- not a universal fitting. Ensures proper fit and function.
Backed by Lippert's limited 1-year manufacturer warranty for defects in materials and workmanship.
The cam lock connector is the quick-connect fitting at the sewer-outlet end of the Waste Master hose assembly. Two cam arms rotate to lock onto the sewer inlet fitting at the campground pedestal or dump station, creating a hands-free, tool-free seal. This design is central to the Waste Master system's appeal -- no threading, no fumbling with collars while wearing gloves.
Because the cam arms bear the mechanical load of locking and unlocking repeatedly, they are a wear item. Replacing a faulty connector restores the full no-hands, no-mess operation the Waste Master system is known for.
This connector is designed exclusively for use with Lippert Waste Master sewer hose systems. The Waste Master lineup uses a proprietary cam lock interface that is not interchangeable with standard 3-inch sewer bayonet fittings or generic cam-lock couplings. Before ordering, confirm you have a Waste Master system installed in your RV.
Replacement is typically a tool-free process -- the connector detaches from the Waste Master hose end and the new unit is pressed and locked into place following the same assembly method used on the original. Inspect the mating surfaces on the hose end for wear or cracking while the connector is off, and clean the sewer outlet fitting before reattaching.