A direct-replacement brake hub built for heavy-duty trailer axles. The Lippert 814212 ships with a complete bearing cone kit so you have everything needed to get your axle back in service -- no hunting down separate bearing sets. Engineered for 8 on 6.5-inch bolt pattern hubs rated to 7,000 lbs per axle.
Trailer hub failures rarely happen at a convenient time. The Lippert 814212 is a purpose-built replacement hub machined from solid iron for long-term durability under heavy load. Whether you are restoring a worn-out axle on a fifth wheel, travel trailer, or utility trailer, this hub delivers a precise OEM-style fit on 7,000-lb Lippert axle assemblies.
Unlike bare hub replacements that leave you sourcing bearings separately, the 814212 bundles the full bearing cone kit in one box. You get the inner and outer bearing cones, inner and outer bearing cups, a double-lip grease seal to keep contaminants out, and a cotter pin to lock the spindle nut -- everything a proper hub service requires.
Cast solid iron construction withstands the heat and stress of trailer braking loads on 7,000-lb rated axles.
Includes inner and outer bearing cones and cups, double-lip grease seal, and cotter pin -- no separate bearing sourcing needed.
Eight-lug, 6.5-inch bolt circle matches a wide range of 16-inch and 17.5-inch trailer wheels common on heavy RV and utility trailers.
Backed by Lippert's limited 1-year warranty for manufacturer defects, consistent with their trailer component product line.
The Lippert 814212 is designed for trailer axles with the following specifications. Confirm all parameters before ordering.
Lippert Components is one of the largest OEM and aftermarket suppliers of RV and trailer running gear in North America. Their axle and hub components are factory-installed on trailers from many major manufacturers. The 814212 is an OEM-style replacement engineered to the same tolerances as the original equipment it replaces.