A full 6-foot propane hose built for high-pressure appliance connections on RVs, campers, and outdoor cooking setups. The swivel fitting on the female flare end makes for easy, no-twist hookup to your tank or regulator outlet, while the 3/8" male pipe thread end connects directly to high-pressure burners, wok ranges, fryers, griddles, and other BTU-hungry appliances. UL-listed and CGA-certified -- not a bargain import.
Most compact propane hoses top out at 12" or 24" -- enough for a simple tabletop hookup but not enough to run a high-BTU burner safely away from your propane source. This 72" (6 ft) hose gives you real working distance, letting you position your appliance away from the tank, regulator, or bulkhead fitting without putting stress on the connections.
The 3/8" female flare swivel inlet mates with standard POL/QCC regulator outlets and propane fittings that terminate in a 3/8" male flare. The swivel design means you can tighten the connection without twisting or kinking the hose body -- critical on a 6-foot assembly. The 3/8" MPT (male pipe thread) outlet threads directly into the gas inlet of compatible high-pressure appliances or manifolds.
Handles full high-pressure propane supply -- well above regulator output pressures used in typical RV and outdoor cooking applications.
3/8" female flare swivel prevents hose twist during tightening and allows repositioning without loosening fittings.
Rated -40 deg F to 140 deg F -- performs in cold-weather camping and hot outdoor cooking environments alike.
Meets Underwriters Laboratories and Compressed Gas Association standards. Required for use at many RV parks and campgrounds.
This hose is designed for high-pressure propane applications -- meaning it is used on the high-pressure side of the supply, before or in place of a two-stage regulator, or downstream of a high-pressure regulator supplying outdoor appliances. Common uses include:
Getting the fittings right is the most important part of any propane hose purchase. Here is exactly what is on each end: