Simply sets over your travel trailer's A-frame — no drilling, no bolting, no clamping. Dedicated storage for weight distribution bars and hitch head. Remove before towing. Perfect for travel and cargo trailers.
The MORryde EzStor Lite™ (SP54-257) delivers the same organized, off-the-ground hitch storage as the EzStor Hitch® — but with the absolute maximum in setup convenience. Where the EzStor Hitch clamps to the A-frame and stays in place, the EzStor Lite simply sets over your travel trailer's A-frame tongue with no attachment of any kind. No drilling, no bolting, no clamping, no tools. Place it when you park, load your weight distribution bars and hitch head into their dedicated spots, and remove it before you hitch up and head out.
For travel trailer owners who want a completely tool-free experience at every campsite — or who don't want anything permanently or semi-permanently on their trailer tongue — the EzStor Lite is the ideal solution. It keeps your tow bars and hitch head clean, organized, and off the ground without any hardware interaction whatsoever. When it's time to go, simply remove the components, lift the EzStor Lite off the A-frame, and stow it.
No drilling, no bolting, no clamping — simply sets over the A-frame tongue. The most tool-free hitch storage solution available
Place on the A-frame when parked, remove before towing — takes seconds with no hardware to manage at each campsite
Keeps weight distribution bars and hitch head elevated and protected from dirt, moisture, and ground contact between uses
Separate, designated spots for both the hitch head and tow bars — no more loose components scattered around the campsite
The EzStor Lite™ is a parking-position storage accessory only. Because it sets over the A-frame without any permanent attachment, it must be removed from the trailer before hitching up and towing. Failure to remove it before towing could result in the unit becoming dislodged while in motion. Correct use sequence: 1. Arrive at campsite → unhitch → set EzStor Lite on A-frame → load hitch components 2. Before departing → remove hitch components → lift EzStor Lite off A-frame → store it → hitch up → tow If you prefer a solution that can remain on the A-frame while towing (empty), see the EzStor Hitch® SP54-254, which uses a clamp to stay in place.
MORryde offers two versions of the EzStor hitch storage system. Both keep your weight distribution bars and hitch head organized and off the ground — the difference is how they interact with your A-frame: SP54-257 — EzStor Lite™ (This Product) Sets over the A-frame with zero attachment — no tools, no clamping, no hardware. Must be removed before towing. Maximum convenience for owners who want the simplest possible setup and breakdown at each stop. SP54-254 — EzStor Hitch® Clamps to the A-frame and stays in place between trips. Can remain on the trailer while towing (empty). Ideal for owners who want a fixed, dedicated storage location that doesn't need to be repositioned at each campsite.
At Each Campsite — Arriving: 1. Unhitch your trailer and complete leveling and stabilizing 2. Set the EzStor Lite over the A-frame — position it on the A-frame tongue in a clear, accessible location 3. Load hitch components — place the hitch head and weight distribution tow bars into their dedicated storage positions Before Departing: 4. Remove hitch components from EzStor Lite and install them on your tow vehicle 5. Lift EzStor Lite off the A-frame and store it in a compartment or truck bed 6. Hitch up and tow Refer to MORryde's EzStor Lite Install Instructions for complete guidance.
In The Box: • EzStor Lite™ Storage Assembly • Installation Instructions NOT Included: • Weight distribution hitch head (sold separately) • Weight distribution tow bars (sold separately) • Mounting hardware (none needed) Also Available: • SP54-254 EzStor Hitch® — clamp-on version that stays on the A-frame between trips
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV storage, stability, and specialty vehicle products.
Both products organize and protect your weight distribution hitch components at the campsite. The key difference is whether you want a tool-free, fully removable solution or a fixed clamp-on mount that stays on the trailer.
If you want absolute maximum convenience with zero hardware interaction at every campsite, the SP54-257 EzStor Lite™ is the right choice. If you prefer a fixed solution that stays on the trailer and never needs repositioning, the SP54-254 EzStor Hitch® is the better fit.