Illuminated start/stop rocker switch panel for QG 2500/2800, KV MicroLite, and KVD Camp Power generators. Switch only — no hourmeter. Wiring harness sold separately.
The Cummins Onan 300-4936 is a remote control panel for the QG 2500, QG 2800, KV MicroLite, and KVD Camp Power generator families — the smaller non-diagnostics Onan gasoline and LP generators. It features an illuminated rocker switch with running indicator light and mounts inside the RV via the included mounting plate, screws, and template.
The 300-4936 is the standard switch-only panel for this generator family. If you also want to track run hours, the 300-4937 adds an analog hourmeter, and the 300-4938 adds a DC voltmeter. All three require the same wiring harness and fit the same generators.
Note that these 300-493x panels are for the QG 2500/2800 / KV / KVD family specifically. The QG 3600–7000 generators (KY, HGJAA/HGJAB/HGJAC) use the 300-5331/5332/5333 panel family instead.
Backlit start/stop rocker switch with running indicator light — easy to locate and operate in low-light conditions inside the RV
Panel assembly, mounting plate, mounting screws, and instruction sheet with full-size mounting template all included
Works with both gasoline and LP vapor-fueled QG 2500/2800 and KV/KVD generators
Connects via the sealed remote panel connector on compatible generators — pairs with the 338-3489-01 (10') or 338-3489-02 (30') wiring harness, sold separately
This panel does not include a wiring harness. To connect it to your generator you will need: • 338-3489-01 — 10-foot harness • 338-3489-02 — 30-foot harness Note that both harnesses require the sealed remote connector found on KV Spec F and later. They are not suitable for KV Spec A–E generators, which lack this connector.
The 300-4936 is for QG 2500 / QG 2800 / KV / KVD generators only. If you have a QG 3600, QG 4000, QG 5500, QG 6500, QG 7000, KY, KYD, HGJAA, HGJAB, or HGJAC generator, you need the 300-5331 (standard) or 300-5332/5333 panel family instead.
Backed by a 90-day limited manufacturer's warranty against defects in materials and workmanship.
Not compatible with KV Spec A–E (harness restriction). For QG 3600 and larger generators, use the 300-5331 / 300-5332 / 300-5333 panel family.