Home > Electrical > Generator Parts & Accessories >

Onan 046-00563 8" Drop x 53" Run Generator Exhaust Tailpipe

Onan 046-00563 8" Drop x 53" Run Generator Exhaust Tailpipe
Onan 8" Drop x 53" Run Generator Exhaust Tailpipe
 
: $40.99
Part Number: 046-00563
Manufacturer: Cummins Onan
NOTE: Ground Shipping Only

Quantity in Stock :20

Availability: In Stock
Qty:

 
Cummins Onan 046-00563 Exhaust Tailpipe - 8" Drop x 53" Run - 1-1/2" O.D. 90-Degree

Cummins Onan 046-00563 Exhaust Tailpipe — 8" Drop × 53" Run | 1-1/2" O.D. | Without Coupler

Genuine OEM 90-degree exhaust tailpipe for Cummins Onan RV generators using 1-1/2" O.D. exhaust systems. Pipe only — clamp and hanger sold separately.

90-Degree Exhaust Tailpipe for 1-1/2" O.D. Onan Exhaust Systems

The Cummins Onan 046-00563 is a single 90-degree steel exhaust tailpipe for Cummins Onan RV generators specifying 1-1/2" O.D. exhaust — including the QG 5500/6500/7000 Series (HGJAA, HGJAB, HGJAC) and Quiet Diesel QD Series. The 8" drop routes exhaust vertically down from the generator compartment; the 53" run carries it horizontally to the RV sidewall exit. The long run suits larger Class A motorhomes where the generator sits well inboard from the sidewall.

"Without coupler" means the pipe has plain, unmodified ends — no slip-sleeve is pre-attached. A clamp (Onan 155-1015) and hanger (Onan 155-2174) are required to complete the installation and are sold separately.

📐 8" Drop × 53" Run

Long-run geometry for larger Class A motorhomes — confirm both dimensions match your installation clearance before ordering

🔧 1-1/2" O.D. / 1-3/8" I.D.

Standard pipe size for QG 5500/6500/7000 and QD Series — not compatible with older BGE/NHE/KV family generators which use 1-1/4" O.D.

↩️ Single 90-Degree Bend

Pre-formed drop-and-run geometry for standard below-floor generator compartment installations

🏭 Genuine Cummins OEM

OEM exhaust parts maintain the certified spark-arresting system and do not void the Cummins Onan generator warranty

⚠️ Measure Your Installation Before Ordering

The 53" run is fixed — if your sidewall exit is closer, order a shorter 046-series pipe. Overly long tailpipes increase exhaust back pressure and can reduce generator performance. Confirm both the drop and run dimensions against your actual installation clearance before ordering.

🚫 Verify Pipe Diameter — Wrong Size Is a CO Hazard

This pipe is 1-1/2" O.D., for QG 5500/7000 and QD Series generators only. Older Onan families (BGE, NHE, KV, NH RV) use 1-1/4" O.D. A mismatched connection creates a leaking joint that allows exhaust gases into the RV — a potentially fatal carbon monoxide hazard.

Technical Specifications

Part Number046-00563
BrandCummins Onan
Part TypeExhaust Tailpipe — Pipe Only
Bend90 Degrees
Drop (Vertical Leg)8"
Run (Horizontal Leg)53"
Outer Diameter1-1/2"
Inner Diameter1-3/8"
CouplerWithout Coupler (plain ends)
IncludesPipe only — clamp and hanger not included
Related ClampOnan 155-1015
Related HangerOnan 155-2174
Weight3.45 lbs
Warranty90-Day Limited

📋 Warranty Information

Backed by a 90-day limited manufacturer's warranty against defects in materials and workmanship.

Using non-OEM exhaust parts voids Cummins Onan warranty coverage and transfers liability for resulting damage or injury to the installer.



Browse for more RV Accessories in the same category as this item:

Electrical > Generator Parts & Accessories
Electrical