Home > Covers > Travel Trailer Covers >

Classic Accessories PermaPRO Travel Trailer Cover Model 6 -- Fits 30 to 33 Ft Trailers, Part 01-0275

Classic Accessories PermaPRO Model 6 travel trailer cover part 01-0275 fits 30 to 33 foot trailers with ripstop fabric and zippered access panels
Classic Accessories PermaPRO Travel Trailer Cover - Model 6 - 30'-33'
 
Alternative Views:


Travel Trailer Cover, Classic Accessories Cover, Trailer Accessories
List Price: $739.59
: $550.49
You save $189.10!
Part Number: 80-139-191001-00
Manufacturer: Classic Accessories

Quantity in Stock :8

Free Shipping
Availability: In Stock
Qty:

 
Classic AccessoriesFits 30-33 FtLimited Lifetime WarrantyPermaPRO Travel Trailer Cover -- Model 6 (30 to 33 Ft)

Keep your investment protected year-round with the Classic Accessories PermaPRO Model 6 travel trailer cover. Built from extra-strength ripstop fabric with a quick-drying finish, this cover blocks UV rays, repels water, and resists tearing -- all while venting trapped moisture so your trailer stays dry inside and out during long-term storage.

Purpose-Built Protection for 30 to 33 Foot Travel Trailers

The PermaPRO Model 6 is engineered specifically for travel trailers in the 30 to 33 foot range. Unlike generic tarps or one-size-fits-all covers, this unit uses adjustable tension panels at the front and rear along with elasticized hem corners to conform closely to your trailer's profile. The result is a secure, low-flutter fit that reduces wind stress on both the cover and your trailer's exterior.

At 402 inches long, 104 inches tall, and 102 inches wide, the cover provides generous clearance while staying snug enough to stay put in windy storage conditions. Weighing in at 26.2 lbs, it is substantial enough to handle the elements without being unmanageable for a single person to install.

Ripstop Fabric Construction

Extra-strength PermaPRO ripstop fabric resists tearing and repels water. Quick-drying finish prevents mold and mildew buildup during storage.

Air Vent System

Built-in air vents reduce wind stress on the cover and allow interior moisture to escape, preventing condensation damage to walls, seals, and insulation.

Zippered Access Panels

Zippered panels positioned at RV entry doors and storage compartments let you grab gear or check on your rig without removing the entire cover.

Integrated Strap System

Weighted toss bags and integrated strap attachment points eliminate the need to crawl under the trailer. Long zipper pulls minimize ladder use during installation.

Fit and Adjustment

Getting a cover to stay put on a 30-plus-foot trailer takes more than elastic. Classic Accessories addresses this with adjustable front and rear tension panels that let you dial in the fit along the full length of the trailer. The elasticized hem corners grip the underside profile of the trailer at each corner, keeping the cover from riding up in wind. Tension panels absorb the stress created when you cinch the belly straps, protecting the fabric from premature wear at contact points.

Custom-Fit Design: The combination of front and rear tension panels plus elasticized corners means this cover conforms to your specific trailer's contours rather than just draping loosely over it. Less flutter means less abrasion on your trailer's surface over a full storage season.

Installation -- Designed for One Person

Large travel trailer covers are notoriously difficult to install solo. Classic Accessories built several practical features into the PermaPRO line to address this directly.

  • Weighted toss bags let you throw the strap ends under the trailer and pull them out the other side without lying on the ground
  • Integrated strap attachment points keep straps organized and prevent them from slipping during tensioning
  • Long zipper pulls on all access panels can be reached from ground level, reducing the number of times you need to climb a ladder
  • The storage bag features an expandable design so repacking the cover at the end of storage season is straightforward
Storage Bag Included: The PermaPRO Model 6 ships with a zippered storage bag sized for the cover. The bag expands to make packing easier -- helpful when the cover is slightly damp or stiff in cold weather.

What This Cover Protects Against

The PermaPRO fabric system is designed to handle the full range of outdoor storage hazards a travel trailer faces between trips.

  • UV ray degradation -- prevents fading and cracking of fiberglass, decals, and rubber seals
  • Rain and moisture intrusion -- ripstop weave with water-repellent treatment sheds precipitation
  • Dust and dirt accumulation -- keeps the exterior clean and reduces wash cycles
  • Wind-driven debris -- ripstop construction resists tearing if debris contacts the cover
  • Bird droppings and tree sap -- keeps the finish protected during outdoor storage
Maintenance Tip: Rinse the cover with clean water periodically to remove accumulated dirt. Allow the cover to dry fully before repacking into the storage bag to prevent mildew. Inspect the vent seams and tension panel seams at the start of each storage season.

Warranty

Classic Accessories backs the PermaPRO Model 6 with a limited lifetime manufacturer warranty. This reflects the brand's confidence in the ripstop fabric and construction quality. Retain your purchase receipt for warranty claims.

Part Number Reference: This product is sold under Classic Accessories part number 01-0275, also referenced as 80-139-191001-00. Use either number when contacting Classic Accessories support or searching for replacement parts.

Cover Dimensions

Covered Length402 in (33.5 ft)
Cover Height104 in (8 ft 8 in)
Cover Width102 in (8 ft 6 in)
Cover Weight26.2 lbs

Fitment

RV TypeTravel Trailer
Trailer Length Range30 ft to 33 ft
Model DesignationModel 6

Part Identification

ManufacturerClassic Accessories
Part Number01-0275
Alternate Part Number80-139-191001-00
UPC052963008258

Materials and Construction

Fabric TypePermaPRO ripstop -- extra-strength, quick-drying
Water ResistanceWater-repellent treated fabric
UV ProtectionYes -- UV-blocking fabric treatment
Hem CornersElasticized for snug fit
Zipper PullsExtended length for ground-level reach

What is Included

Cover1x PermaPRO Model 6 trailer cover
Storage Bag1x expandable zippered storage bag
Tension StrapsIntegrated strap system with weighted toss bags
WarrantyLimited lifetime manufacturer warranty
Important Information
  • Measure your travel trailer carefully before ordering -- this cover is sized for trailers 30 ft to 33 ft in length. Using an undersized or oversized cover will compromise fit and protection.
  • Trailer length measurements should be taken from the front of the trailer (including the tongue/hitch if applicable) to the rear -- verify against the 402 in maximum covered length.
  • The cover is designed for storage use. It is not intended for use while towing.
  • Allow the cover to dry fully before storing in the bag to prevent mildew and fabric degradation.
  • Inspect all straps and tension points at installation -- do not overtighten the belly straps, as this can stress the fabric at contact points.
  • This listing covers Classic Accessories part 01-0275 only. Other PermaPRO model numbers cover different trailer lengths and are sold separately.


Browse for more RV Accessories in the same category as this item:

Covers > Travel Trailer Covers
Covers