Home > Electrical > Battery Chargers >

BatteryMINDer 128CEC2 12V 2/4/8 Amp Smart Charger, Maintainer, Desulfator and Lithium Battery Charger

BatteryMINDer 128CEC2 12V 2/4/8 Amp Smart Battery Charger Maintainer Desulfator with LED indicators and SAE quick-connect cord set
BatteryMINDer 128CEC2 12V 2/4/8 AMP Charger-Maintainer-Desulfator & Lithium Charger Maintainer
 
Alternative Views:


: $180.00
Part Number: 128CEC2
Manufacturer: BatteryMINDer

Quantity in Stock :5

Free Shipping
Availability: In Stock
Qty:

 
BatteryMINDer 12V -- 2/4/8 Amp IP65 Rated BatteryMINDer 128CEC2 -- 12V Smart Charger, Maintainer, and Desulfator with Lithium Support

The BatteryMINDer 128CEC2 is a fully automatic 7-stage smart charger built for RV owners, boondockers, and anyone who needs reliable 12V battery health year-round. It charges, maintains, and actively desulfates all 12V lead-acid battery types -- flooded, AGM, sealed, VRLA, deep cycle, and lithium -- without risk of overcharge. The quick-connect SAE system means you can hook it up once and leave it connected indefinitely, no need to touch battery posts or lift the hood every time.

7-Stage Smart Charging for Every 12V Battery Type

Most basic chargers push a fixed amperage until you disconnect them. The 128CEC2 works differently. Its 7-stage charging algorithm continuously monitors battery condition and adjusts output automatically -- from initial analysis through long-term float maintenance. That means it can recover a deeply discharged battery just as effectively as it can maintain a fully charged one sitting in storage all winter.

Select your amperage and battery type with a simple push-button: 2 amps for a fully charged battery in maintenance mode, 4 amps for large deep-cycle or multi-battery setups, and 8 amps (Odyssey mode) for premium AGM and Odyssey batteries. The built-in temperature sensor automatically adjusts charge voltage across a range of -4F to 122F, so charge rate stays accurate in freezing winters and hot summer storage.

US Patented Desulfation

100% full-time pulse-type desulfation continuously breaks down harmful lead sulfate buildup -- the primary cause of capacity loss in aged batteries.

Lithium Compatible

Charges and maintains 12V lithium (LiFePO4) batteries in addition to all flooded, AGM, sealed, and gel lead-acid types. One unit handles your whole system.

Odyssey-Approved

Officially approved by Odyssey Battery for use with their premium AGM line. Use the dedicated Odyssey setting at 8 amps for correct charge profile.

Maintain Up to 8 Batteries

Using the optional BatteryMINDer Y-Connector Accessory 210-AY (sold separately), a single 128CEC2 can maintain up to 8 batteries simultaneously.

7 Charging Stages -- What Each One Does

  • Stage 1 -- Analyze: Tests and qualifies the battery. Accepts healthy batteries and rejects batteries with bad cells before charging begins.
  • Stage 2 -- Desulfate: Applies US-patented pulse frequency to begin dissolving harmful sulfate deposits on the plates.
  • Stage 3 -- Soft Start: Applies a low current to gently bring deeply discharged batteries back into a chargeable state.
  • Stage 4 -- Bulk: Delivers maximum selected output (2, 4, or 8 amps) to bring the battery to approximately 85% charge quickly and safely.
  • Stage 5 -- Absorption: Reduces current and holds voltage steady to complete the charge to 100% without heat buildup.
  • Stage 6 -- Test: Re-evaluates the battery to determine whether additional desulfation is needed before moving to maintenance.
  • Stage 7 -- Maintenance: Holds the battery at a temperature-compensated full charge indefinitely. Safe for permanent connection.
No Overcharge -- Ever: The 128CEC2 cannot overcharge your battery regardless of amperage setting or how long it remains connected. The 7-stage algorithm prevents overvoltage and thermal runaway automatically.

Battery Type Compatibility

The 128CEC2 is compatible with virtually every 12V battery chemistry used in RVs, motorhomes, tow vehicles, boats, and powersports applications:

  • Flooded (wet cell) with filler caps
  • Sealed maintenance-free (VRLA, SLA)
  • AGM (Absorbed Glass Mat) -- including Odyssey brand
  • PLT (Pure Lead Technology)
  • Deep cycle and dual-purpose lead-acid
  • 12V Lithium (LiFePO4)
  • Starter and hybrid vehicle 12V auxiliary batteries
Not Compatible With: Nickel-cadmium (NiCad), nickel-metal hydride (NiMH), or aircraft batteries. Do not use the 128CEC2 with 6V or 24V battery banks.

Built-In Protections and Safety Features

The 128CEC2 includes a full suite of hardware and firmware protections that make it safe for unattended, always-on use in your RV or garage:

  • Short circuit protection
  • Reverse polarity protection
  • Spark prevention on connection
  • Thermal runaway protection
  • Automatic DC disconnect on AC power failure
  • Auto-restart after power outages
  • Bad cell detection and rejection
  • 15A replaceable fuse on both clip and ring terminal cord sets

ECO Mode and Status Indicators

The 128CEC2 operates in ECO mode by default -- a high-efficiency, low power consumption mode that reduces energy draw during long-term maintenance. Eighteen LED indicators across the front panel display real-time state-of-charge, battery condition, and active charging stage at a glance. No guessing whether your battery is being charged, desulfated, or just maintained.

Permanent Connection Option: The included SAE quick-connect ring terminal cord set allows you to permanently mount a pigtail to your battery terminals. Plug and unplug the charger in seconds -- no tools, no hood access required. Ideal for RVs and vehicles in seasonal storage.

Amperage Selection Guide

  • 2 Amp: Use when the battery is already charged and in good condition. Ideal for long-term maintenance and storage.
  • 4 Amp: Use for larger deep-cycle batteries, discharged batteries, or when maintaining more than one battery via Y-connector.
  • 8 Amp (Odyssey Mode): Use exclusively for Odyssey-brand batteries and other high-performance AGM types that require the Odyssey charge profile. This is the highest charge rate and is typically used for faster recovery of large battery banks.
Maintenance Tip: For RVs stored between seasons, plug the 128CEC2 in via the ring terminal pigtail and leave it connected all winter. The 7-stage algorithm and ECO mode will keep your house and chassis batteries in peak condition without any intervention.
Accessory Required for Multi-Battery Use: To maintain up to 8 batteries simultaneously, add the BatteryMINDer Y-Connector Accessory model 210-AY. Sold separately. The 128CEC2 itself ships without the Y-connector.

Electrical Specifications

Part Number128CEC2
ManufacturerBatteryMINDer
Output Voltage12V DC
Charging Current2 / 4 / 8 Amps (selectable)
AC Input90-140 VAC, 47-63 Hz
Temperature Compensation Range-4F (-20C) to 122F (50C)

Physical Specifications

Length4.9 inches
Width7.3 inches
Height2.1 inches
Weight3 lbs
WeatherproofingIP65 -- dust-tight, water-jet resistant

IP65 Weather Rating

Dust ProtectionFully dust-tight (IP6x) -- no ingress of dust
Water ProtectionProtected against water projected by a 6.3mm nozzle from any direction (IP x5)
Suitable ForOutdoor use, engine compartments, RV battery bays

Status Display

LED Indicators18 LEDs
DisplaysState of charge, battery condition, active charging stage, fault codes
Battery SelectorPush-button (Wet/AGM/Sealed, Odyssey, Lithium)
Amp SelectorPush-button (2A / 4A / 8A)

What is Included in the Box

Charger Unit1x BatteryMINDer 128CEC2
AC Cord1x 6-foot AC power cord
DC Cord1x 6-foot DC cord with SAE quick-connect/disconnect
Alligator Clip Set1x insulated battery clip cord with SAE quick connector and 15A replaceable fuse
Ring Terminal Set1x ring terminal cord with SAE quick connector and 15A replaceable fuse
Temperature Sensor1x auto temperature compensation sensor (pre-installed)

Warranty and Certifications

Money-Back Guarantee1 Year 100% Money-Back Guarantee
Product Warranty5 Year "No Hassle" Warranty
Odyssey ApprovedYes -- use 8A Odyssey mode setting
Desulfation PatentUS Patented pulse-type desulfation technology

Optional Accessories (Sold Separately)

Multi-Battery ConnectorBatteryMINDer Y-Connector 210-AY (maintain up to 8 batteries)
Important Information -- Read Before Use
  • This unit is rated for 12V batteries only. Do not use with 6V or 24V battery systems.
  • Not compatible with NiCad, NiMH, or aircraft batteries. Using the 128CEC2 on incompatible chemistries may damage the battery or unit.
  • The Y-Connector accessory (model 210-AY) required for multi-battery operation is sold separately and is NOT included in the box.
  • Always verify correct polarity before connecting clips or ring terminals. The unit includes reverse polarity protection, but correct connection is still required.
  • AC input range is 90-140 VAC. Do not use with inverters or generators producing power outside this range without verifying output stability.
  • IP65 rating provides protection against dust and water jets, but this unit is not submersible. Do not allow it to sit in standing water.
  • The 15A fuses in the clip and ring terminal cords are replaceable but must be replaced with the same 15A rating only.
  • For Odyssey batteries, always select the dedicated Odyssey charge profile at 8 amps, not the standard Wet/AGM setting.


Browse for more RV Accessories in the same category as this item:

Electrical > Battery Chargers
Electrical
BatteryMinder


$1,399.00
$66.63
$105.49
$15.33