Keep your Group 24 battery locked down and leak-contained whether you are parked at a campsite or pounding through chop on the water. This Camco tray meets USCG and ABYC standards, uses stainless steel hardware that resists corrosion, and has a solid leakproof bottom that contains acid spills before they reach your RV or boat hull.
A loose battery is one of the most preventable causes of electrical shorts, acid damage, and fire on an RV or boat. The Camco 55394 hold-down tray is built from heavy-duty, acid-resistant plastic with a solid bottom -- no drain holes, no gaps -- so any electrolyte that escapes the battery stays contained in the tray rather than eating through your floor, wiring, or fiberglass.
Hardware is stainless steel throughout, which matters in the wet, salty, and corrosive environments where batteries live. The cross-bar hold-down system clamps across the top of the battery to prevent vertical and lateral movement, and the tray itself can be bolted to your existing battery compartment floor using the included mounting hardware.
Sized specifically for Group 24 batteries -- the most common single-battery format found in RVs, boats, and utility trailers. Interior cavity matches standard Group 24 footprint.
The tray bottom has no openings, so acid or electrolyte that escapes the battery is fully contained. Protects your battery compartment floor and nearby wiring from corrosive damage.
All included mounting and hold-down hardware is stainless steel for long-term corrosion resistance in humid, marine, and outdoor environments.
Meets USCG CFR 183.420 and ABYC E-10.7 specifications -- required by many boat builders and useful validation for any safety-conscious RV installation.
The 12.2 x 8.5 x 1.4-inch footprint fits the majority of OEM RV battery compartments designed around a Group 24 cell. The low 1.4-inch tray depth keeps the battery sitting close to the compartment floor without eating into vertical clearance. The 6-3/4-inch spacing between the cross-bar flats accommodates the typical Group 24 top profile and applies clamping force evenly without damaging the battery case.