Keep your shore power cable and hoses protected from cuts, abrasion, and wear every time you extend or retract them. The Glendinning 04076-RLR5 mounts through the floor of your storage bay and guides cables cleanly underneath your coach -- so you can run power without opening the compartment door, and without scraping your expensive cable across rough edges.
Shore power cables and hoses take a beating. Every time they rub against a raw compartment edge, they lose a little insulation, a little life. The 04076-RLR5 puts smooth plastic rollers between the cable and the floor opening, eliminating that contact point entirely. The result is a clean, consistent exit path that works trip after trip without damaging your cable jacket.
The snap-lock hatch closes securely when the cable is stowed, sealing out road debris, moisture, and pests. When you need to run power, the cable routes through the open hatch roller -- and because the assembly mounts through the floor, you can keep the storage bay door completely closed while connected to shore power.
Smooth plastic rollers cradle the cable as it moves, preventing abrasion damage to the jacket on 50 amp and standard power cables.
The integrated hatch snaps firmly closed when not in use, blocking road grime, insects, and moisture from entering the storage bay.
Floor-mounted installation lets you run power or hoses with the compartment door fully closed -- no propped doors, no vibration damage.
Comes with all mounting hardware and a hole drilling template so you can cut the correct opening on the first try.
The 04076-RLR5 is a floor-mount guide roller, meaning it installs through the bottom of a storage compartment or undercoach bay. The cable or hose drops down through the hatch opening, passes over the roller guides, and exits cleanly underneath the coach. The rollers hold the cable away from sharp edges throughout the full range of extension and retraction.
This design is especially useful for motorhomes and coaches that use a chassis-mount power reel or store their shore power cable in a dedicated underbay. Instead of routing the cable over a bare edge each time, the roller assembly creates a fixed, protected pathway.
A hole drilling template is included in the box. Use it to mark and cut the correct circular opening in the compartment floor. The assembly drops into the hole, and the included hardware secures it from above. The hatch lip is designed to seat against compartment floors up to 3/4" thick -- the most common dimension in RV storage bay construction.