When no other PullRite capture plate matches your fifth wheel pin box, the 3317 Universal Capture Plate is the solution. Designed to bolt directly through the bottom of virtually any trailer pin box using a 10-bolt pattern, it bridges the gap between PullRite SuperGlide hitches and non-standard or aftermarket pin boxes that lack a dedicated capture plate option.
PullRite engineers the 3317 as a universal adapter -- the capture plate you reach for after confirming that no pin-box-specific plate (such as those designed for Lippert, Mor/Ryde, or OEM pin boxes) will fit your trailer. Rather than leave owners stranded with an incompatible setup, PullRite provides this plate to extend SuperGlide hitch compatibility across the widest possible range of fifth wheel trailers.
Installation is straightforward: the plate mounts from below using 10 bolts through the base of the pin box. No welding, no frame modifications. If you are unsure whether a model-specific capture plate exists for your pin box, start there first -- the universal plate is intentionally the last step in the selection process.
Compatible with virtually any fifth wheel trailer pin box when no dedicated capture plate is available for that specific box.
Installs through the bottom of the pin box with 10 bolts -- no frame drilling or welding required.
Backed by PullRite's 5-year manufacturer warranty for long-term confidence on every tow.
Manufactured domestically to PullRite's heavy-duty hitch standards for quality and traceability.
PullRite SuperGlide hitches use a capture plate mounted to the trailer's pin box as the mating interface. When the hitch engages, it locks onto the capture plate rather than directly onto the kingpin alone. This design is what allows the SuperGlide's signature fore-aft sliding motion -- which moves the hitch rearward during turns to maintain proper truck cab clearance on short-bed pickups.
Because pin box dimensions and bolt patterns vary by manufacturer and model, PullRite offers multiple model-specific capture plates. The 3317 exists for situations where none of those specific plates align with your pin box geometry.
The 3317 capture plate is designed for use with PullRite SuperGlide automatic sliding fifth wheel hitches. It is not a standalone towing component -- it functions only as part of the PullRite SuperGlide system.