Everything you need to plumb a Remco 3/4" Quick Attach 12-volt sprayer pump into your spray system -- three fittings in one kit, molded from chemical-resistant polypropylene, ready to install without hunting down individual parts.
Remco's FQ5F-1212 Quick Attach Fitting Kit is designed specifically for owners of Remco 3/4" Quick Attach sprayer pumps and the Remco sprayer manifold. Rather than sourcing a straight barb, an elbow barb, and a male NPT fitting separately, this kit delivers all three in a single package sized and rated for the job.
The fittings mate directly to Remco's 3/4" Quick Attach port system -- the same push-and-lock interface used on Remco's 12-volt demand and diaphragm sprayer pumps. Because all three fittings are molded from polypropylene, they hold up against the fertilizers, herbicides, pesticides, and agricultural chemicals that would degrade softer or metal fittings over time.
Includes a straight hose barb, an elbow hose barb, and a male NPT straight -- all the connections needed to route 1/2" hose from your pump in virtually any layout.
Molded polypropylene resists a broad range of agricultural chemicals, fertilizers, herbicides, and pesticides better than brass or soft plastics in sprayer service.
Fittings are sized for Remco's 3/4" Quick Attach pump port system -- no adapters required when used with compatible Remco pumps and the Remco sprayer manifold.
The complete kit weighs just 0.05 lbs., making it easy to keep a spare set on hand in a toolbox or spray rig for field repairs.
Remco's Quick Attach port is a proprietary push-to-connect locking interface found on their line of 12-volt sprayer pumps. It allows fittings to seat and lock without threading into the pump body itself, which speeds installation and reduces the risk of cross-threading or cracking a pump port. The FQ5F-1212 fittings are engineered to that interface dimension -- 3/4" Quick Attach on the pump side, transitioning to standard 1/2" connections on the hose side.
This kit is sized and rated for Remco 3/4" Quick Attach sprayer pumps and the Remco sprayer manifold. It is also noted to be compatible with some other pump brands that use the same 3/4" Quick Attach port standard. If you are unsure whether your pump uses the 3/4" Quick Attach interface, check your pump's port markings or original fitting size before ordering.