When your slide-out topper fabric tears, sags, or grows mildew, replacing just the fabric is the cost-effective fix. Lippert's Solera LIP432252 gives you a full 50-foot roll of heavy-duty white vinyl -- plenty of material to cover virtually any slide width -- so you cut it to length on site and waste nothing.
Slide-out toppers do one critical job: they prevent leaves, twigs, standing water, and road grime from piling up on the roof of your slide while it travels or sits in storage. A torn or sagging fabric lets all of that accumulate in the gap between slide and coach -- leading to rot, mold, and eventual water intrusion into your RV's interior walls and floor.
The Solera replacement fabric uses heated wedge welding at every seam, fusing layers of vinyl together rather than stitching them. Stitched seams eventually wick water; welded seams don't. The result is a leak-resistant barrier that sheds water cleanly and holds up through repeated slide cycles.
Treated outer layer resists abrasion from the slide mechanism and roof contact during operation, reducing wear at stress points.
Fabric is treated to inhibit mildew growth -- critical for RVs stored in humid climates or parked for extended periods.
Heated wedge welding fuses vinyl layers together for seams that are stronger and more water-resistant than sewn alternatives.
The 50 ft roll is perforated and designed to be trimmed on site to match your exact slide-out width -- no guessing at the store.
The fabric ships rolled inside a protective box that latches closed after each use, keeping the unused portion clean and shielded from UV, dirt, and moisture during the install process. The roll is perforated so you can pull out only what you need without disturbing the rest of the coil.
To install, measure your slide-out width, unroll the required length, cut cleanly across the perforation line, and load the fabric into your Solera topper cassette. The 50 in depth dimension is pre-set -- that is the measurement that wraps around the roller tube and hangs down over the slide roof. Most residential and Class A/C slide-outs fall well within this coverage depth.
This fabric is designed for Lippert Solera slide-out topper assemblies. It is compatible with Solera cassette-style toppers that accept rolled replacement fabric loaded into the housing. If you are unsure whether your topper accepts replacement fabric (versus requiring full cassette replacement), check whether the end caps on your topper housing are removable -- that is the most common indicator of a serviceable cassette.
Lippert covers this fabric with a limited 5-year manufacturer warranty against defects in materials and workmanship. Keep your purchase receipt as proof of purchase date. Warranty does not cover damage from improper installation, abrasion from debris, or operating the slide with fabric that is already torn.