Give your 19-foot awning assembly a fresh start with this purpose-built replacement fabric from Lippert. The V000334432 is a 13.5-oz vinyl fabric in Blue Fade, engineered to retrofit Solera, Dometic, and Carefree roller awning systems. Heat-welded seams, an 8-foot projection, and cold-crack resistance down to -25F make it a durable long-term upgrade over sun-bleached or torn OEM fabric.
When your existing awning fabric is cracked, faded, torn, or leaking at the seams, a full fabric swap is the most cost-effective fix -- and this Lippert Solera fabric is made specifically for that job. At 18'1" wide, it is designed to drop into a 19-foot awning assembly; the fabric runs approximately 11 inches shorter than the full awning width, which is the correct fit for standard roller tube installations in this size class.
The underside of the fabric is white, which reflects heat into the living space and creates a cleaner look under the awning. The top surface carries the Blue Fade gradient colorway, giving the exterior a polished, modern appearance.
Heavy-duty vinyl weight provides resistance to UV degradation, wind stress, and moisture without adding excessive bulk to the roller assembly.
Critical stress points are reinforced with heat-welded seams rather than stitching, eliminating needle holes and reducing the risk of seam leaks during rain.
The vinyl compound is formulated and tested to remain flexible in sub-zero temperatures, preventing cracking and brittleness in cold-weather storage or use.
A poly cord is integrated along the leading edge hem, allowing an optional LED light track to be threaded in -- lights and light track are sold separately.
This fabric is made to fit roller awning systems from Solera, Dometic, and Carefree -- three of the most common OEM and aftermarket awning brands found on travel trailers and fifth wheels. It uses the standard fabric bead and roller tube attachment method shared across these systems.
Awning fabric width is always listed shorter than the full awning assembly width. This 18'1" fabric is the correct replacement for a 19-foot awning assembly. The roughly 11-inch difference accounts for the end caps and roller tube hardware. Measure your existing fabric or awning rail spread before ordering to confirm the correct size.
This replacement fabric is manufactured to order. It cannot be returned or exchanged once the order is placed. Double-check your awning assembly size and confirm the fabric width you need before submitting your order.