3000 watt true sine wave inverter/charger for marine, RV, work truck, and mobile power systems. Converts 12V battery power to clean 120V AC output, charges compatible battery banks at up to 150 amps, and supports CANbus NMEA 2000 integration for compatible monitoring systems.
The Xantrex 818-3015 Freedom XC Pro Marine 3000 is a 3000 watt true sine wave inverter/charger designed for marine, RV, work truck, commercial vehicle, and other mobile power systems. It converts 12V DC battery power into utility-grade 120V AC power for sensitive electronics, appliances, tools, and selected AC loads.
This Marine version of the Freedom XC Pro 3000 supports CANbus NMEA 2000 protocol for integration with compatible marine and vehicle monitoring systems. It combines high-capacity inverter output, a powerful 150 amp battery charger, and built-in transfer switching in one compact unit.
Provides 3000 watts of clean continuous 120V AC inverter output
Supports 2X continuous power surge for hard-to-start loads
Built-in charger supports faster charging from shore or generator power
Marine model supports CANbus NMEA 2000 protocol integration
The Xantrex 818-3015 Freedom XC Pro Marine 3000 is commonly used in boats, RVs, vans, work trucks, service vehicles, class 8 trucks, and specialty vehicles that need both high-capacity inverter power and battery charging in one compact unit. Typical uses may include powering entertainment equipment, computers, refrigerators, microwave loads, CPAP machines, tools, small appliances, and selected AC branch circuits while also charging the house battery bank from shore power or generator input.
• One Xantrex 818-3015 Freedom XC Pro Marine 3000 inverter/charger • Installation/owner documentation and included hardware/accessories as supplied by manufacturer
This inverter/charger requires proper DC battery cable sizing, overcurrent protection, AC input/output wiring, grounding, ventilation, battery bank capacity, and charger configuration. A 3000W inverter/charger can draw very high current from a 12V battery bank, so installation design is critical. Configure the charger profile to match the installed battery type before use. Marine and RV installations should follow all applicable electrical standards and manufacturer installation instructions.
Inverter/charger installation involves high-current 12V DC wiring, 120V AC wiring, battery charging, transfer switching, and grounding requirements. Incorrect installation can cause electrical shock, fire, battery damage, equipment damage, or unsafe backfeed conditions. Installation should be performed by a qualified RV, marine, or electrical technician familiar with inverter/charger systems and battery charging requirements.
The Xantrex 818-3015 Freedom XC Pro Marine 3000 is a 3000W true sine wave inverter/charger for 12V battery systems with a 150A charger, built-in transfer switching, and CANbus NMEA 2000 support. Verify model version, battery voltage, battery chemistry, charger output, inverter load, cable sizing, ventilation, and system integration needs before ordering.