3000 watt true sine wave inverter/charger for RV, marine, work truck, and mobile power systems. Converts 12V battery power to clean 120V AC output, charges compatible battery banks at up to 150 amps, and includes a built-in 50 amp transfer relay.
The Xantrex 818-3010 Freedom XC Pro 3000 is a 3000 watt true sine wave inverter/charger designed for RVs, boats, commercial vehicles, work trucks, and other mobile power systems. It converts 12V DC battery power into utility-grade 120V AC power for sensitive electronics, appliances, tools, and selected AC loads.
The Freedom XC Pro 3000 combines high-capacity inverter output, a powerful 150 amp battery charger, and a built-in 50 amp transfer relay in one compact unit. It supports multiple battery chemistries, including lithium iron phosphate, and integrates with compatible monitoring systems through RV-C, NMEA 2000, and J1939 protocols.
Provides 3000 watts of clean continuous 120V AC inverter output
Supports 2X continuous power surge for up to 5 seconds
Built-in battery charger supports faster charging from shore or generator power
Automatically transfers connected loads between AC input and inverter power
The Xantrex 818-3010 Freedom XC Pro 3000 is commonly used in RVs, boats, vans, work trucks, service vehicles, class 8 trucks, and specialty vehicles that need both high-capacity inverter power and battery charging in one compact unit. Typical uses may include powering entertainment equipment, computers, refrigerators, microwave loads, CPAP machines, tools, small appliances, air conditioner startup loads in properly designed systems, and selected AC branch circuits while also charging the house battery bank from shore power or generator input.
• One Xantrex 818-3010 Freedom XC Pro 3000 inverter/charger • Built-in 50A transfer relay • Installation/owner documentation as supplied by manufacturer
This inverter/charger requires proper DC battery cable sizing, overcurrent protection, AC input/output wiring, grounding, ventilation, battery bank capacity, and charger configuration. A 3000W inverter/charger can draw very high current from a 12V battery bank, so installation design is critical. Configure the charger profile to match the installed battery type before use. Installation should allow proper clearance for cooling airflow and service access.
Inverter/charger installation involves high-current 12V DC wiring, 120V AC wiring, battery charging, transfer switching, and grounding requirements. Incorrect installation can cause electrical shock, fire, battery damage, equipment damage, or unsafe backfeed conditions. Installation should be performed by a qualified RV, marine, or electrical technician familiar with inverter/charger systems and battery charging requirements.
The Xantrex 818-3010 Freedom XC Pro 3000 is a 3000W true sine wave inverter/charger for 12V battery systems with a 150A charger and built-in 50A transfer relay. Verify battery voltage, battery chemistry, charger output, inverter load, transfer wiring, cable sizing, ventilation, and system integration needs before ordering.