2000 watt true sine wave inverter for RV, marine, work truck, and mobile power systems. Converts 12V battery power to clean 120V AC output and includes a built-in transfer switch for compatible shore power or generator pass-through installations.
The Xantrex Freedom X 817-2000 is a 2000 watt true sine wave inverter designed to power sensitive electronics, appliances, entertainment systems, and motor loads from a 12V battery bank. It produces clean 120V AC power that is better suited for modern electronics than modified sine wave inverter output.
The Freedom X series includes a built-in AC transfer switch, allowing connected AC loads to transfer between inverter power and an available AC input source when properly installed. This makes it a strong choice for RV and marine installations where selected circuits need inverter power while still allowing shore power or generator pass-through.
Provides 2000 watts of continuous true sine wave AC power
Designed for 12V battery bank systems in RV and marine applications
Integrated AC transfer relay supports compatible shore/generator pass-through wiring
Compatible with optional Freedom X/XC remote panels and Bluetooth remote options
The Xantrex Freedom X 817-2000 is commonly used in RVs, boats, vans, work trucks, service vehicles, and mobile power systems that need clean AC power from a 12V battery bank. Typical uses may include powering entertainment equipment, computers, small appliances, microwave loads, refrigerators, CPAP machines, tools, and selected AC branch circuits when the battery bank, wiring, fusing, and installation design are properly sized.
• One Xantrex Freedom X 817-2000 2000W true sine wave inverter • Built-in AC transfer switch • Installation/owner documentation as supplied by manufacturer
This inverter requires proper DC battery cable sizing, overcurrent protection, grounding, ventilation, AC input/output wiring, and battery bank capacity. Installation should be planned around the expected AC loads and the battery runtime required. The Freedom X 817-2000 is an inverter only. It does not charge batteries. If battery charging from shore power is needed, use an inverter/charger model such as the Freedom XC series or a separate compatible battery charger.
Inverter installation involves high-current 12V DC wiring and 120V AC wiring. Incorrect installation can cause electrical shock, fire, equipment damage, battery damage, or unsafe backfeed conditions. Installation should be performed by a qualified RV, marine, or electrical technician familiar with inverter systems, transfer switching, grounding, and battery protection requirements.
The Xantrex Freedom X 817-2000 is a 2000W true sine wave inverter for 12V battery systems with 120V AC output and a built-in transfer switch. Verify battery voltage, load requirements, surge needs, wiring size, overcurrent protection, and installation design before ordering.