30A MPPT solar charge controller for 12V and 24V RV, marine, work truck, and specialty vehicle solar systems. Supports AGM, gel, flooded, and LiFePO4 house batteries, with dual battery-bank charging, built-in LCD system data, and high-efficiency MPPT charging.
The Xantrex 710-3024-01 MPPT 30 Solar Charge Controller is designed to maximize solar charging performance in 12V and 24V battery systems. MPPT technology helps harvest more power from the solar array than a basic PWM controller, making it a strong upgrade for RV solar systems where space, sunlight, and charging efficiency matter.
This controller supports dual battery-bank charging, allowing the main house battery bank to receive up to 30A of charge current while also maintaining a secondary starter battery output at up to 1A. It supports common lead-acid battery types as well as Lithium Iron Phosphate house batteries, making it useful for modern RV and mobile power systems.
Advanced MPPT technology helps increase daily energy harvest compared with PWM controllers
Charges the house battery bank while maintaining a secondary starter battery
Automatically supports 12V and 24V nominal battery systems
Displays PV array and battery system data directly from the controller
The Xantrex MPPT 30 is suitable for RVs, marine systems, heavy-duty trucks, work trucks, and specialty vehicles where solar charging is used to support house batteries and maintain a starter battery. It is especially useful when using higher-voltage PV array designs or when upgrading from a PWM controller to improve solar charging efficiency.
• One Xantrex 710-3024-01 MPPT 30 Solar Charge Controller • Built-in LCD display • Integrated wiring terminals for PV array, Battery 1, Battery 2, remote panel, and optional temperature sensor
Xantrex lists the following optional accessories for this controller: • 710-0010 MPPT Remote Panel with 25 ft cable — provides remote real-time solar system data • 708-0080 Remote Battery Temperature Sensor — optimizes charging for lead-acid batteries Temperature sensing is intended for lead-acid batteries only.
Do not exceed the controller's voltage, current, or power limits. Confirm PV open-circuit voltage, PV input power, battery chemistry, battery voltage, cable size, fuse sizing, and grounding requirements before installation. Xantrex recommends wiring be performed by a certified PV technician or electrician where required by applicable codes. Disconnect batteries and cover or disconnect solar panels before servicing the system.
The Xantrex 710-3024-01 MPPT 30 is a 30A solar charge controller for 12/24V systems with dual battery-bank charging, lithium-compatible house battery charging, high-efficiency MPPT operation, and optional remote monitoring accessories.