Home > Covers > Pop-Up Trailer Covers >

ADCO SFS AquaShed Folding Trailer Cover 12'1" to 14' Gray - Part 01-1140

ADCO SFS AquaShed gray folding trailer cover part 01-1140 fits 12 foot 1 inch to 14 foot pop-up campers with triple-layer water-shedding top panel
ADCO 12293 SFS AquaShed Folding Trailer Cover - 12'1" to 14'
 
List Price: $182.70
: $155.49
You save $27.21!
Part Number: 12293
Manufacturer: ADCO

Quantity in Stock :9

Free Shipping
Availability: In Stock
Qty:

 
ADCO SFS AquaShed Fits 12'1" to 14' ADCO SFS AquaShed Folding Trailer Cover -- 12'1" to 14' (Part 01-1140)

Purpose-built for pop-up and folding camper trailers, the ADCO SFS AquaShed cover delivers triple-layer top protection in a breathable, all-season design. If you store your rig in a wet climate or open driveway, this cover is engineered to shed rain on contact, block UV rays, and actively vent moisture so mold and mildew never get a foothold.

Built for Wet Climates, Designed to Breathe

Most covers make you choose between waterproofing and breathability. The SFS AquaShed does both. The top panel uses a triple-layer SFS (Super Fab System) construction that beads water instantly on contact, while the high-performance polypropylene side panels allow interior moisture to escape -- preventing the trapped humidity that destroys canvas, wood trim, and fabrics over a storage season.

ADCO designed this cover specifically for folding and pop-up trailers, which have unique geometry -- low-profile when folded but wide enough that standard covers bunch, slip, or create water traps. The tailored fit for 12'1" to 14" lengths, combined with front and rear cinching and strap-and-buckle attachments, keeps the cover locked in place through wind, rain, and freeze-thaw cycles.

Triple-Layer SFS Top Panel

Beads water on contact for maximum rain resistance and high humidity performance. Also provides moderate UV protection to shield your trailer's roof and canvas.

Breathable Polypropylene Sides

High-performance polypropylene side panels allow air circulation, virtually eliminating mold and mildew buildup during long storage periods.

Secure Fit System

Front and rear cinching system tightens loose fabric, while strap-and-buckle attachments prevent billowing and lifting in wind. Reinforced elasticized corners resist tears and snags.

Zippered Access Panels

Zippered panels let you access storage compartments on your trailer without removing the entire cover -- a practical feature for seasonal or long-term storage.

What the SFS AquaShed System Actually Does

"SFS" refers to ADCO's Super Fab System -- a proprietary triple-layer laminate used on the roof section of AquaShed covers. The three layers work together:

  • Outer layer sheds rain and resists moisture penetration
  • Middle layer adds structural integrity and UV blocking
  • Inner layer protects the trailer surface from abrasion and traps any remaining moisture vapor for outward wicking

The polypropylene sides do not waterproof -- they are intentionally permeable so that any condensation inside the cover can escape. This is the correct approach for folding trailers stored outdoors: a fully waterproof cover that traps interior humidity does more long-term damage than rain.

Ideal Climate for This Cover: The SFS AquaShed is ADCO's go-to recommendation for high-moisture, moderate-to-high rainfall climates with moderate sun intensity. If you store in a region with intense UV and very low humidity (desert Southwest), consider ADCO's Tyvek or SFS Max series instead.

Fitment and Measuring Your Trailer

This cover fits folding and pop-up trailers with a closed (folded) length between 12 feet 1 inch and 14 feet. Measure your trailer from the front coupler to the rear bumper when fully folded and latched.

Roof-Mounted A/C Units: If your trailer has a rooftop air conditioner, add 1 foot to your measured length before selecting a cover size. The A/C unit adds effective height and length that affects fit.
  • Measure trailer length bumper to coupler (folded/closed position)
  • Do not include the tongue or tow hitch in your measurement
  • Add 1 foot if a roof-mounted A/C is installed
  • Verify height -- this cover accommodates up to 54" of folded height

Installation Tips

The SFS AquaShed installs as a one- or two-person job depending on wind conditions. ADCO recommends a calm day for initial fitting.

  • Clean and dry your trailer before covering to prevent trapping dirt and moisture
  • Feed the cover from front to rear, draping over the roof first
  • Tighten front and rear cinch straps before securing side buckles
  • Tension strap-and-buckle attachments snugly but not so tight that they stress the seams
  • Re-check tension after the first rain -- fabric can loosen slightly as it seats
Storage Tip: ADCO includes a dedicated storage bag with this cover. When removing the cover for the season, fold it loosely rather than stuffing it tightly -- this prevents crease damage to the laminate layers. Store the bag in a cool, dry location.

What's in the Box

  • 1 x ADCO SFS AquaShed folding trailer cover (gray)
  • 1 x Storage bag
  • Integrated strap and buckle attachment system
Note: Roof-mounted A/C covers, tire covers, and hitch covers are NOT included. This cover is designed for the folding/pop-up trailer body only.

Cover Specifications

ManufacturerADCO Products
Part Number01-1140
SKU92-1765
UPC723111122934
Cover SeriesSFS AquaShed
ColorGray
Weight7.5 lbs

Fitment

Trailer TypeFolding / Pop-Up Camper Trailer
Trailer Length Range12'1" to 14'
Measurement ReferenceBumper to coupler, trailer fully folded
A/C Fitment AdjustmentAdd 1 foot if roof-mounted A/C is installed

Physical Dimensions

Cover Length168 inches (14'0")
Cover Width85 inches (7'1")
Cover Height54 inches (4'6")

Material and Construction

Top Panel MaterialTriple-layer SFS (Super Fab System) laminate
Side Panel MaterialHigh-performance polypropylene
Corner ReinforcementReinforced elasticized corners
BreathabilityYes -- polypropylene sides allow moisture vapor to escape
UV ResistanceModerate (top panel); ideal for moderate-sunshine climates

Security and Access Features

Access PanelsZippered panels for storage access
Wind RetentionStrap and buckle attachment system
Fabric TensioningFront and rear cinching system
Corner ProtectionReinforced elasticized corners

Warranty and Packaging

WarrantyLimited 2-year manufacturer warranty
IncludedCover + storage bag
Not IncludedA/C cover, tire covers, hitch cover
Important Information -- Read Before Purchasing
  • Measure your trailer in the fully folded and latched position, bumper to coupler. Do not include the tow hitch or coupler handle in your measurement.
  • If your trailer has a roof-mounted air conditioner, add 1 foot to your measured length when selecting a cover size.
  • This cover is rated for moderate UV climates. It is not the recommended choice for prolonged storage in high-UV, low-humidity desert environments -- consider ADCO's Tyvek-based series for those conditions.
  • The polypropylene side panels are intentionally breathable and are not waterproof. This is by design to prevent mold. Do not expect the sides to fully block driven rain -- position your trailer with the sides away from prevailing storm direction when possible.
  • Do not install over a dirty or wet trailer -- trapped debris and moisture accelerate wear on both the cover and trailer surface.
  • A/C covers, tire covers, and hitch covers are sold separately and are not included in this package.
  • This cover is intended for outdoor storage use only. It is not a driving cover and must be fully removed before towing.


Browse for more RV Accessories in the same category as this item:

Covers > Pop-Up Trailer Covers
Covers