Keep your rooftop Coleman Mach AC unit clean, dry, and UV-protected during storage and off-season months. The ADCO 08-0600 is purpose-built for Coleman Mach 8000 series air conditioners and installs in minutes with a parachute-style drawcord -- no tools required.
Leaving your RV's rooftop air conditioner exposed during storage invites leaf buildup, dirt infiltration, UV degradation, and cold-air drafts into the unit. The ADCO 08-0600 cover wraps the full Coleman Mach 8000 footprint in heavy-duty jersey-backed vinyl, blocking all of those threats without trapping moisture.
The parachute-style drawcord cinches tight against the roofline to resist wind lift -- a common failure point with generic or undersized covers. Non-tearable, weatherproof seams mean the cover holds up through multiple seasons of outdoor exposure.
Heavy-duty jersey-backed vinyl construction blocks UV rays that fade shrouds and degrade gaskets and seals over time.
Seals the unit opening to stop cold-air infiltration into the coach during storage and cold-weather camping.
Parachute-style drawcord runs the full perimeter and locks the cover against wind without scratching the rooftop surface.
Reinforced, weatherproof seam construction prevents splitting at corners and edges under tension or high-wind conditions.
This cover is sized specifically for the Coleman Mach 8000 footprint -- not a universal stretch cover. The 37" x 26" x 13.5" profile matches the shroud dimensions of the following Coleman Mach models:
Place the cover over the AC shroud from the roof or a ladder. Route the parachute drawcord around the base of the unit, pull snug, and tie off. The entire process takes under two minutes and leaves no marks on the shroud or roof membrane.
The ADCO 08-0600 is designed for storage-season protection but is also used by full-timers and cold-weather campers to reduce heat loss through the AC unit during winter stays. The vinyl material handles freeze-thaw cycling without cracking.